Brand:SS
MOQ:1
Quantity:50
Send Inquiry
25T small fixed pump injection moldingmachine;Parameters of 250kn plastic injectionmolding machines;
| Items | Parameter | Unit | Parameter Value (SSF250) | |
| Injection Unit | Screw diameter | mm | A | B |
| 22 | 25 | |||
| Screw L/D ratio | L/D | 17.7 | 15.5 | |
| shot volumn (theoretical) | Cm3 | 30 | 38 | |
| injection weight(PS) | g | 27 | 34 | |
| plasticizing capacity | g/s | 2.6 | 3.3 | |
| injection rate | g/s | 25 | 32 | |
| injection pressure | Mpa | 185 | 143 | |
| screw speed | rmp | 165 | ||
| Clamping unit | clamp force | KN | 250 | |
| open stroke | mm | 150 | ||
| distance between tie bars (W*H) | mm | 240*190 | ||
| max mould thickness | mm | 220 | ||
| min mould thickness | mm | 80 | ||
| ejector stroke | mm | 40 | ||
| ejector force | KN | 13 | ||
| ejector number | PC | 1 | ||
| dia of mould location hole | mm | 55 | ||
| Others | max pump pressure | Mpa | 14 | |
| pump motor power | KW | 3 | ||
| heating power | KW | 2.5 | ||
| machine dimension | m | 2.75*0.86*1.35 | ||
| machine weight | T | 1 | ||
| oil tank capacity | L | 85 | ||
Characteristics of this small injection moldingmachine as below;
1.Double-cylinder balanced injection system;
2.Multi-stage pressure &speed injection;
3.Back pressure adjustment device;
4.Low pressure mold protection;
5.Single hydraulic core pulling and inserting;
6.Multiple hydraulic ejector knock-out;
7.Mechanical, electrical safety device;
8.Auto lubrication system;
9.Hydraulic pressure full proportional control;
10.Computer control system;
11.Moldingdata memory system;
12.Automatic mould adjustfunction.
13.Energy saving with variable pump;
14.Bi-metallic screw toanti-corrosion, which is applicable to nylon or glassmaterial.
15.Five-point inward moving toggle system ensure high rigidty andprecision for mold clamping and also reducing stress and staineffects;
16.Oil pipelines are positioned for aesthetic appearance and easyfor maintenance;
17.The moving platen is fitted with adjustable slide support systemto improve platen parallelism and provide better tie bar and mouldprotection and lengthen the working lifetime;
18.Nozzle alignment is provided using a simple mechanism with fineadjustment for accurate centering.
Selectable label langauges posted on plastic injectionmolding machine.




