HIGH FLOW NICE TRAP EASY CLEAN AND INSTALL
TRENCH DRAIN , FLOORDRAIN , LINEAR SHOWER DRAIN , AAB
HIGH FLOW NICE TRAP EASY CLEAN AND INSTALL
DOUCHEGOOT DUSCHRINNE DUSCHABLAUF AVAVOERGOTENABLAUF
RINNEOERGOTE
Stainless steel shower channel DRAINI
extra flat, EDGE DRAIN, removable odor trap
Very elegant DIAODRAIN stainless steel shower drain with removabledrain cover
stainless steel, with an elegant glossy Edge-design.
By discretely inserted into the end edge of the aperture onlyremains in the installed
state, the
High gloss stainless steel surface with the lateral width 6mm drainslit visible.
Individual can not make the bath.
The end panel is always easy and hygienic cleaning by the largesmooth stainless steel
surfaces.
With surrounding Fliesenflanschkante 20mm wide for easy access andmaximum load tiles.
The exact Fliesenflanschkonstruktion 15mm below the gutteredge,
leaves room for more tiles and facilitates the access gap.
In addition, the channel is equipped with adjustable steel legs andcan be easily adapts
different mounting heights.
Expresses the flat design of only 67 mm makes it even lowprofile.
Of course, the solid steel gutter drain incl Adapter for 40mm or50mm tubes supplied.
This allows to easily and flexibly realize the barrier-freetransition from the wet to the
dry area.
The removable grate provides convenient access at all times to thesiphon and a good
cleaning ability of the channel and the drain body.
In addition, the trap is completely removable and therefore easierto clean.
Product advantage:
- Super slim elegant stainless steel trough, SS 304
- Revolving stable Fliesenflansch
- High-gloss end panel with side edge flow
- Drain suitable for plastic pipes with 40mm or 50mm cuffs
- 4 built-in spacers ensure the precise flow aperture in thechannel
- Stainless steel with removable plastic trap
- One-piece removable stainless steel cover
- Height-adjustable feet anchor
- Extra flat only 67mm
data:
Channel length: 600 mm (total length 640 mm includingFliesenflansch)
Channel width: 70 mm
Overall width: 110 mm (incl. Fliesenflansch)
Channel height approx: 25 mm (including G-closure approximately 67mm)
Fliesenflansch about: round 20 mm wide, 15 mm below the gutteredge
Tile channel: 12 mm deep, 48 mm wide (inside dimensions)
Discharge capacity approx: 35 l / min
Tube diameter: 40 mm (50 mm with adapter)
Scope of delivery:
1 St. Stainless Steel Shower channel DRAINI 600 mm
including stainless steel drain cover illustrated withEdge-like
2 pcs ground anchor
1 pc adapter 40/50mm
optionally available in our shop as well as 700, 800, 900 and 1000mm
N ABLAUFRINNE
