1.Precision
2.Fast
3.Energy saving
4.Stable and super long life plastic machine
plastic injection moulding machine
1.Precision,
2.Fast,
3.Energy saving,
4.Stable and super long life plastic machine
Haitai HTW serise injection molding machine ranges from68T-3000T, aiming at processing high quality plastic products,because of its high-performance, Haitai machine is widely usedamong domestic and foreign customers. With the pursuit ofindependent innovation constantly, Haitai now processes a total of33 independent intellectual property rights, three of which areinvention patents with high technology content. The use of advancedcomputer software designed to optimize the parameters of the mostoptimal design. And the application of automatic sampling system isused to test performance parameters of the new product. HaitaiHTL-series injection molding machines has smaller deformation ofthe platen,smoother movement, longer working life, lower energyconsumption, easily operation, so it has been recognized by themarket. Haitai HTW-series injection molding machine is a strongopen platform, which can meet the customer''s special request, likeadding special features so as to suit all kinds of processtechniques.
1. MainProducts:
A. Servo energy-saving injection molding machine. (HTW-JD)
B. PET Injection molding machine. For bottle perform. (HTW-PET)
C. UPVC/PVC Injection molding machine. ( HTW-UPVC/PVC)
D. FAST Injection molding machine. ( HTW-F)
E. Variable Pump Injection molding machine. ( HTW-JC)
F. Two Color Injection molding machine.
2.Advantage:
Strong Technical design ability, Stable quality, and largeproduction capability, Famous brand.
3. Productiondescription:
CONTROLSYSTEM
All-digital control system uses dedicated controller, multipleCPU processing division,
a multi-functional automatic fault detection, alarm system,certificates 99 mold of
processing procedures, with remote control interface. System is ofhigh stability and
responsiveness. System uses color LCD, man made interface for easyoperation and
with a number of peripheral interfaces.
FEATURES
- A variety of text can be switched.
- Manual, semi-automatic and fully automatic mode.
- To provide EUROMAP robot interface.
- Automatic movement monitoring with alarm and fault diagnosis.
- Function of slope setting can set the start and stop ofmovements, so as ensure the smooth movement.
HYDRAULICSYSTEM
Advanced hydraulic system design, through proportional controlof pressure, flow achieves rapid multi-level pressure, speedswitching, the system configuration is reasonable, stable andreliable. The noise is less than 75 dB. The medium and largemachine adopts a two-way cartridge inserted valve system to improvethe system of flow and speed of response, and makes the wholemachine reach the best performance.
INJECTIONSYSTEM
2005, diversified screw optimal design municipal science andtechnology research projects focus on key issues is completed, andis now designed professionally and production for a whole varietyof raw material. the diversity of the screw is for your option.
FEATURES
- There are three or four screws and barrels with optimaldesign, respectively, nitride, hard plating, dual-metal, whichis suitable for different processes of a variety of plastics. andthe choice of product.
- Two-guided guided bar supports, double-balanced rapidinjection.
- The high-torque hydraulic motors offer a stable plasticizingcapacity, highprecision electronic device position detection enableaccurate measurement.
- Multi-injection speed and pressure and multi-level holdingpressure settings, switch from the injection time, location,pressure control to ensure the quality of molding.
- Multi-level back-pressure of pre-plastic and pre-speed arecomputer-controlled, anti- drooling and automated autopurge.
- Expected to prevent cold-start function to ensure that thescrew, Liao Tong will not be harmed. Stability of theinjection unit.
- Security doors fitted with hydraulic, mechanical andelectrical interlocking triple safety device. When the safetydoor is open, the machine cannot clamp.
- Low pressure mold protection device to prevent damage toplaten.
- Plywood, frame, the bridge, and the template attachedstructure, the finite element analysis.
- Hydraulic ejector, adjustable stroke, and top speed of ejectorin and out, for multiple actions.
- Flexible tie bars nut eliminates fatigue fracture; assure theworking life of tie bars
- Automatic adjustment. The replacement of different mold, theparameters set by clamping force to achieve the automaticadjustment.
- High-precision electronic detection device, multi-stagecontrol of opening stoke, speed and location, locationaccuracy.
TECHNICAL PARAMETERS forsmall plastic machine
| SPECIFICATION | HTW200 | |||
| A | B | C | ||
| INJECTION UNIT | ||||
| Screwdiameter | mm | 45 | 50 | 55 |
| Screw L/D ratio | L/D | 23.3 | 21 | 19.1 |
| Shotvolume(theoretical) | cm3 | 340 | 420 | 510 |
| Injiectionweight(ps) | g | 310 | 383 | 466 |
| Injection rate | g/s | 124 | 154 | 186 |
| Injectionpressure | Mpa | 207 | 168 | 139 |
| Screw pressure | rpm | 155 | ||
| CLAMPING UNIT | ||||
| Clamping force | kN | 2000 | ||
| Open stroke | mm | 475 | ||
| Space between tiebars(W×H) | mm | 530×530 | ||
| Max.Mold height | mm | 530 | ||
| Min.Mold height | mm | 200 | ||
| Ejector stroke | mm | 140 | ||
| Ejector force | kN | 70 | ||
| OTHERS | ||||
| Max.Pump pressure | MPa | 16 | ||
| Pump motor power | kW | 18.5 | ||
| Heating power | kW | 13.6 | ||
| Machinedimension(L×W×H) | m | 5.22×1.57×2.21 | ||
| Oiltank cubage | L | 300 | ||
| Machine weight | t | 7 | ||
PLATEN DIMENSION
MOULD DIMENSION
4.Certificates:
5. HAITAIAIM: YOUR NEEDS,
OUR SOLUTIONS,
YOUR SUCCESS!
6. AGENTWANTED
Small plastic injection molding machine
