MPPT 100/30
Maximum Power Point Tracker Maximum Power Point Tracking Technology increases the efficiency ofyour PV system Less expensive solar-panels for grid-feed-in systems can now beused for 12/24V off-grid systems Electronic protection (reverse polarity, over-current,short-circuit, over-temperature) High efficiency DIN Rail compatible Negative grounding |
With innovative maximum-power-tracking technology, Phocos''MPP-Tracker ensures maximum performance from your solar array atall times and in all weather conditions. The MPPT can yield anenergy gain of up to 30% from your PV array (with the average gainbeing 10%-25%).
When a Central Unit is used, up to 16 MPPTs can be used togetherin one system. The charge regulation is then done via data bus bythe Central Unit. This will enable you to increase your systemcapacity substantially.
The temperature-compensated three-stage I-U curve chargeregulation alogarithm significantly extends the lifespan of yourbattery.The possibility to use less expensive grid-feed-insolar-panels with up to 95V open circuit voltage for 12V or 24Vstand-alone systems will significantly reduce the cost of the totalsystem.
TYPE | MPPT 100/30 |
Nominal Voltage | 12V/24V,automatic recognition |
Nominal battery charge current | 30A |
Max. Solar Input Voltage Voc | 95V |
Max. PV Input Power | 450W@12V, 900W@24V |
Max. Battery Charge Current | 33A |
Power Conversion Efficiency | over 98 % |
Standby Power Consumption | < 30mW at 12V system voltage (< 2mA) |
Temperature compensation | -4 mV/cell*K |
Max. wire size | 32mm2 |
Dimensions | 185 x 150 x 115mm |
Weight | 1.6kg |
Temperature range | -40 to 50 °C |
Type of protection | IP22 |
