Brand:qunhui/khons
MOQ:10
Quantity:6000
Workingpressure | From 0.5 to 2.5bar | Responsetime | Open≤3.0ms,Close≤2.0ms | |||
Maxpressure | 3.0 bar | Workinglife | ≥400 million times or100 thousand KM | |||
Workingtemperature | -40°C~120°C | Suggested holdingcurrent | 2.0A | |||
Storetemperature | -40°C~120°C | Burstpressure | ≥1.0Mpa | |||
Fueltype | CNG,LNG,LPG | Inlet gasfitting | M12×1,Φ10mm(standard) or Φ16mm | |||
Peak currenttime | 3.5ms±3% | Outlet gasfitting | M10×1,Φ6.5mm(outer diameter) | |||
Coilresistance | 3.0±0.2Ohm(20°C) | Calibrated holerange | 1.5mm(standard)~3.5mm | |||
Workingvoltage | 6V~12V | Logo | It can be choosed bycustomers | |||
Peakcurrent | 4.0A | Color | It can be choosed bycustomers | |||
Injector Railoutlet gas fitting specification and corresponding enginepower: |
| |||||
| ||||||
Outlet gas fittingspecs. | Single cylinderpower (HP/CYL.) |
| ||||
Nozzleø(mm) | Min. | Max. |
| |||
1.5 | 12 | 16 |
| |||
2.0 | 17 | 22 |
| |||
2.5 | 23 | 30 |
| |||
3.0 | 31 | 38 |
| |||
3.5 | 39 | 50 |
| |||
Packaging & Delivery
Packaging Details: standard export packing
Delivery Detail: 5-7 days after confirm yourorder
Specifications
CNG/LPG common rail chemical injection valve
1. ISO9001 QCT809-2009
2.good technology, simple structure, assembleeasily
Description
Injection valve and rail, commonly known as injector rail,a keycomponent of gas vehicle multi-point electronically controlledinjection system, includes solenoid valve, nozzles and rail bodyetc. The nozzles mounted inside the rail body, quantity is equal tothe number of engine cylinders. The injector rails are suitable forall types of engines and vehicles.
Advantages
1.Simplestructure
2.Long working life
3.Complete variety andspecification
4.Shorter response time
Features
1.Meet the QTC809-2009 standard and ISO9001:2008.
2.Applying to liquefied petroleum gas and compressednature gas.
3.Applying to car, bus and truck (CNG, LNG and LPG fuelsystem).
4.High quality can be comparable with the Italy brand"RAIL" , "AEB" or"BRC".
Each product must be tested in theprocess of producing, completion, and delivery.
5.The types include 1-cylinder, 2-cylinders, 3-cylinders,4-cylinders, 6-cylinders and many others.
6.Single version with a short stroke, gas injection can becontrolled precisely.
7.Meet National IV emissionstandard, good fueleconomy.
8.The unique structure, convenientto clean and maintain, accessory parts can be changed
separately, low repairing cost.
Above is just one of our products, wealso can do kinds of similar products with your design andrequirements, such as CNG injector with 1 cylinder, 2 cylinders, 3cylinders, 6 cylinders and other different technicaldata.
We are a Chinese manufacturer , having abundant exportingexperiences at kinds of AUTO gas parts (CNGLNGLPG injectors etc.),including the QTC809-2009 standard and so on . If you intersted any, please contact us freely .
