Brand:Hisson
MOQ:1
Quantity:50
Send Inquiry
HI-SV268 Servo motor injection moldingmachineServo motor system configurations:PLC:Taiwan TECHMATION controllerDriver:Top brand in China INNOVANCEOil pump:Italy SETTIMAServomotor: Italy PHASE.Technical parameters
| HI-SV268 | Parameters | ||||
| TECHNICALPARAMETERTABLE | Unit | A | B | C | |
| INJECTION UNIT | Screw Diameter | mm | 55 | 60 | 65 |
| Screw L/Dratio | L/D | 21.8 | 20 | 18.4 | |
| Shot volume(theoretical) | cm3 | 598 | 712 | 836 | |
| Injectionweight(PS) | g | 538 | 641 | 752 | |
| Injection rate | g/s | 240 | 285 | 334 | |
| Plasticizingcapacity | g/s | 38 | 45 | 52 | |
| Injectionpressure | Mpa | 200 | 168 | 143 | |
| Screw speed | rpm | 0-190 | |||
| CLAMPING UNIT | Clamping force | Kn | 2680 | ||
| Open stroke | mm | 550 | |||
| Tie bardistance | mm | 570x570 | |||
| Max.moldheight | mm | 600 | |||
| Min.moldheight | mm | 230 | |||
| Ejector stroke | mm | 150 | |||
| Ejector force | Kn | 65 | |||
| Ejector number | pcs | 9 | |||
| Others | Max.pumppressure | Mpa | 16 | ||
| Pump motorpower | Kw | 30 | |||
| Heater power | Kw | 14.9 | |||
| Machine dimension(L*W*H) | m | 6.7×1.5×2.2 | |||
| Machine weight | T | 8.0 | |||
| Hoppercapacity | L | 50 | |||
| Oil tankcapacity | L | 580 | |||
Platen size(aside):
HI-SV268 IMM (Photos):
Spare Parts for HI-SV268 IMM:
