Brand:Longsun
MOQ:1
Quantity:100
6 Cavities High Speed Auto PET Bottle BlowMolding Machine
Product features:
1. High efficiency, powersave
2. High Speed
3. Fully automatic
4. PLC control
5. Excellent and stable product quality
6. Human-machine interface, easy operateand control
7. Low machine noise
8. High hygienic
9. Low production cost
10. Easy maintenance and high safety standard
11.1. Especially be suitable for small volume bottles without changeover
12. Less footprint area
Technical parameter
Item | LX???6E | |
Main machine | Bottle capacity | 700ml |
Maximum bottle diameter | 68mm | |
Neck diameter | 18~38mm | |
Maximum bottle hight under neck | 240mm | |
Maximum preform height under neck | 115mm | |
Clamping stroke | 100mm | |
Stretch stroke | 350mm | |
Bottom die stroke | 30mm | |
Bottle pitch | 76.2mm | |
Maximum output rate(bph) | 8,000(500ml water bottle) | |
Number of molds | 6 | |
Heating part | Number of heating modules | 4 |
Number of heating lamps | 8 | |
Number of preform bases | 108 | |
Electric part | Voltage | 220/380V |
Frequency | 50/60Hz | |
Service power | 25~30kw/h | |
Installation power | 70kw | |
Air source (High pressure air consumption depends on PET bottle volume) | Low pressure | 1.0Mpa |
Low pressure air consumption | 2.0~3.0m³/min | |
High pressure | 3.5Mpa | |
High pressure air consumption | 4.0~5.0m³/min | |
Cooling water | Pressure | 2.0~4.0bar |
Cooling water(≤18???) | Flux | 6.0m³/h |
Weight | 6000kg | |
Dimension | Main machine(L×W×H) | 4100×2300×2000mm |
Preform unscrambler(L×W×H) | 2750×1500×2900mm |
