Send Inquiry
Packing 25kg/pp bag,16M/T one 20FCL
Application : blow-film. blow-mouldingapplications
We can provide you different colors with youneed
HDPE | ||
Property | Unit | Typical Value |
Mass density | g/cm 3 | 0.941-0.959 |
Melt flow Rate(190 centidegree /2.16kg) | g/10min | ≤ 1.0 |
Tensile yield strength | MPa | ≥ 19.0 |
Flexural modulus | Mpa | ≥ 965 |
Elongation@ break | % | ≥ 400 |
Impact Embrittlement temperature | centidegree | MAX -118 |
Dielectric Constant | 100KHZ | 2.32 |
1MHZ | 2.31 | |
Loss Tangent | 100KHZ | MAX 0.0001 |
1MHZ | MAX 0.0001 | |
Volume resistivity | OHM-CM | MIN 1x10 15 |
Application | Mainly used for the production of high toughness ofthe telephone, cable insulation material | |
