Office Supplies
SUPER HAND HELD METAL DETECTOR
2016-11-12 14:46  Views:132
Price:Negotiable
Brand:Metal detector
MOQ:5
Quantity:100
Send Inquiry

Function:

1.Elegant appearance,super sensitivity.

2.Rigid for tough service,no damage through free dropping at onemeter altitude.

3.Large 10'' scan suface for quick,thorough scanning.

4.2 kinds of alarm method:buzzer & LED alarm;viberation& LED alarm.

5.Adjustable wensitivity,easy use.

6.Low battery light/Charge light gives a timely alert.

7.After installing chargeable battery (*Optional) in the batterycompartment,you can chareg the device directly.

 

Function:

1.The battery lid can be opened by pushing backward with thumbat the concave groove.

2.Install the 6F22.S006P (9V) battery according to the anode andcathode signs on the battery lid.

3.Cover with the battery lid and push forward firmly.

 

Operation:

1.The battery lid can be opened by pushing backward with thumbat the concave groove.Install the 6F22.S006P (9V) battery accordingto the anode and cathode signs on the battery lid.Cover with thebattery lid and push forward firmly.

2.Grasp the handle and press the button "Sound Alarm Switch" or"Vibration Alarm Switch", the power has been connected.Green "PW"LED turns on.After 1~2 seconds Self-calibrating,the detector underthe normal sensitivity mode.

3.The Search Area scans over a metal target,for example:acoin,you can hear the audio alarm from the Buzzer,and the red alertLED turns on.

4.When the detector turns on and is not detecting metalobjects,you hear a durative audio alert,and the red "Low BatteryIndicator LED" turns on.It indicates that you should replace thebattery.For good detecting fuction and result,we suggest replace anew battery or charge it in time.

 

Operation:

1.Firstly,scanning the front body from the right shoulder,andmove done to the right ankle,from the right ankle to the left,andmove up to the left shoulder.(Refer to Picture 1)

2.Secondly,scanning the back body from the head,move aling theoutline of the body,and over the left hand,the left leg,and movefrom the left ankle to the right ankle,then along the right leg andhand up to the right shoulder,from the neck move along thespine.(Refer to Picture2)

3.While scanning the ankle and feet area,holding the detectorlevel to the ground about 1~2 inches above the surface.Whenadetecting is being done near the ground,reduce thesensitivity.(Nnote:for good detecting effect,far from a very trashyground).

Sensitivity Adjustment:

1.The sensitivity shall be adjusted when performance instabilityis observed or sound is produced when detecting human body withoutany metal stuff because the detection distance is less than thestipulated requirement or the sensitivity is too high.

2.Rotate the Sensitivity Adjuster clockwise,until there is nosound from the Buzzer,then counter-clockwise barely to the positionwhere a sound is produced,then rotate for another half a circleclockwise,until the sensitivity meets the requirement.

Detection distance:

The sensitivity of the detector is determined primarily by thesize,shape and composition of the object to be detected.Typicalperformance figures are given below:

Object:Sensitivity

Pin:30-60mm

One coin:75-100mm

6 inches knife:160-180mm

64 model hand gun:180-195mm

 

Note:

1.Be sure to switch off the power after use.If you arenot going to use it for a while,take the battery out.

2.When use rechargeable battery,duration of charging is5~6 hours.

3.Voltage of Charger:9~12V (DC). (*Charger isOptional)

4.Keep the metal detector dry and clean.Wipe off thedetector by wet cloth,don't use the chemicaldetergent.

 

 

 

 

 

 

 

 

SUPER HAND HELD metaL DETECTOR

Contact Infomation
Send Inquiry
Company name:Qingdao Easeman Electric Co., Ltd.
Status:[Offline] [Send message] [Chat]
Business contact:Daniel Lau(Ms.)
Telphone:
Area: Caribbean Region-Bermuda
Address:No.76, Huanghe two road