MOQ:1
Quantity:100
Send Inquiry
Acceleratedaging testing equipment simulates damagingeffects of long term outdoor exposure of materials and coatings byexposing test samples to varying conditions of the most aggressivecomponents of weathering - ultraviolet radiation, moisture andheat.
Accelerated aging testing equipment usesfluorescent lamps to provide a radiation spectrum centered in theultraviolet wavelengths. Moisture is provided by forcedcondensation, and temperature is controlled by heaters.
Corresponding standard:
ASTMD4329, D499, D4587, D5208, G154, G53; ISO 4892-3, ISO 11507; EN534;prEN 1062-4, BS 2782; JIS D0205; SAE J2020
Technical Parameters of Accelerated aging testing equipment
| Model | FU-106-1 |
| Test chamber size(L×W×H)MM | 1170×450×500 |
| Outside dimension(L×W×H)MM | 1300×550×1480 |
| Chamber materials | 304# stainless steel |
| Temperature range | RT 20°C to70°C |
| Temperature uniformity | ±1°C |
| Temperature fluctuation | ±0.5°C |
| Humidity range | ≥90%RH |
| Controller | TEMI 880 programmablecontroller, touch screen,LCDdisplay |
| Control mode | Balance temperature humiditycontrol (BTHC) |
| Comunication function | Be able to control the machine viacomputer using TEMI control software through RS-232 port on themachine |
| Distance from specimen tolamp | 50±3mm(adjustable) |
| Center distance between the lamps | 70mm |
| Lamp power & length | 40W/Piece, 1200mm/Piece |
| Lifetime of lamp | 1600Hours |
| Irradiance | 1.0W/m2 |
| Effective irradiation area | 900×210mm |
| Standard specimen size | 75×290mm/24 pieces |
| Testing time | 0-999H, adjustable |
| Power | 220V/50Hz /±10% 5KW |
Accelerated aging testing equipment
