Density:60-150(g/m2)          Thickness: 0.05-0.12mm

Specification:50-1200mm         Material:HDPEBOPET

Colour: to order                  Print:to order

Common characteristics ofco-extruded film

1,Good mechanical properties

For the basis of high strength BOPET or BOPP material,co-extruded film has excellent tensile strength,resistant toimpact and puncture, so that it can adapt to mechanical stretch, infavor of high-speed machine package.

2,Good heat sealability

Many film, just like  BOPET and BOPP material, they havepoor heat sealability, but if they can be co-extruded with PE orCPP material that have good heat sealability, the whole will havegood  heat sealability. So we can say because of the compositelayer, the film have good  heatsealability.

3,Good gas tightness,moisture proofing,burning resistance,aromapreserving,UV permeability

    These advantages can help film protectingcontents effectively

4,Good image in commercial activity

The film contains BOPET or BOPP material that is excellent forprint, and good pellucidity,glossiness and stiffness itself, so thefilm is very suitable for the packing goods. And in co-extrudedfilm, the print layer will be protected, twist of fade, will not bedamaged by solvent.

5,Good economical efficiency

Although the film is co-extruded and manufacturing technique iscomplex, the price is also more expensive than same weight, on thewhole, the co-extruded film has good economical efficiency. Itreduce the thickness, reduce the amount of usage. Because the heatresistance of BOPET and BOPP material, the sealing is not limitedto thermosol and beadreaction, can use hot blast andtippedmillingcutter, the change can reduce plenty cost foruser.

6,Suitable for automatic machine

The co-extruded film contain high strength BOPET or BOPPmaterial, after years of experience producing, we use specialformula, make the surface have good tensile strength, suitablefrictional coefficient and good flatness, so in high-speedautomatic machine, the film can through smoothly.

Special introduction

1,The product remains the common characteristics of theco-extruded film

2, The product has advantages as below:

I,Good mechanical properties

HDPE/BOPET co-extruded film use high-strength HDPE material assurface, so strengthen mechanical properties, have better tensilestrength,resistant to impact and pierce, so that it can adapt tomechanical stretch, in favor of high-speed machine package.

II,Good heat sealability

HDPE/BOPET co-extruded film use high-strength HDPE material asheat sealing surface, can enhance the heat sealability.

III,Suitable for automatic machine

HDPE/BOPET co-extruded film use HDPE material as surface that issmoothly, the film has suitable rubbing coefficient and satisfiedplaneness, so in high-speed automatic machine, the film can throughsmoothly.

IV,Good economical efficiency