Two component body filler which has very good properties inspreading, sanding,
adhension and flexibility.
Substrates | Sanded bare metal or epoxy primer | |||
Surface Cleaning | Remove wax, silicon, and other contaminations withdegreaser. | |||
Mixing Ratio | Putty: Hardener=100: 1.5-3 (by weight) | |||
Temperature | Item | Minutes (25â????????) Pot life | Minutes (25â????????) Dry-to-Sand (wet) Time | |
ï¼????5â???????? | AA(Ultra Fast Drying) | 1-2 | 3-6 | |
5-15â???????? | A2(Extra Fast Drying) | 2-4 | 6-12 | |
15-25â???????? | A(Fast Drying) | 4-6 | 10-18 | |
25-30â???????? | B(Standard) | 7-9 | 14-27 | |
ï¼????30â???????? | C(Slow Drying) | 10-13 | 20-36 | |
Method of Application | Spread with putty knife, spreader | |||
Sanding | Wet sanding: first sanding with P80-P240, second sanding withP320-P400. | |||
Not Suitable Substrates | Thermoplastic paint, plastic primer, etch primer and alloy | |||
Shelf Life | 6 months in original sealed can at cool and dry place at20â???????? | |||
Packaging | 4kg | |||
Noteï¼????
1ï¼????Stir well before use. Do not restore excess materials tocan.
2ï¼????Mix with hardener by right ratio. Blend them well toavoid cracking or poor curing.
3ï¼????The putty hardener is flammable, explosive and irritatingto skin. Avoid contact with skin.
4ï¼????Spread a thin coat once on the surface. Deep repair areabetter spread with several thin coats.
5ï¼????Do not apply topcoat on putty directly to avoid loss ofgloss of topcoat.
