25 kg and 250 kg packages can be provided. PVDF is packed in PEplastic bag and then put into a hard cardboard drum. It must bestored in clean, cool, dry place.
Characteristic
Physical properties | Unit | Specification |
|
Appearance | -- | White and semi-transparent pellets | -- |
Density | g/cm3 | 1.75???1.77 | ASTM D792, @23/230C |
Melt flow rate | g/10min | 5???15 | ASTM D1238, 2300C/12.5kg |
Water absorption | % | ≤0.05 | ASTM D570 |
|
|
|
|
Mechanical properties |
|
|
|
Tensile yield strength | Mpa | ≥40 | ASTM D638 50mm/min@230C |
Yield elongation | % | 5-15 | |
Tensile strength | Mpa | ≥30 | |
Elongation at break | % | ≥150 | |
Hardness | Shore D | ≥70 | |
|
|
|
|
Thermal properties |
|
|
|
Melting point | 0C | 165-170 | ASTM D3418,100C/min |
Crystallizing heat | 0C | 140 | -- |
Brittleness temperature | 0C | -63 | ASTM D746A |
Molding shrinkage | % | 2-3 |
|
|
|
|
|
Electrical properties |
|
|
|
Surface resistivity | Ohm/square | ≥1×1014 | ASTM D257/Din 53483 |
Volume resistivity | Ohm.cm | ≥1×1014 | ASTM D257/Din 53483 |
|
|
|
|




