It is made with high quality paper and  two reinforcingstrips of  metal, galvanized steel or aluminumstripes. It is easy application and provides permanentprotection for corners. The corner tape is easier to use thanthetraditional metal corner bead. It is packed in rolls making iteasier to merchandise and transport, it also reduce waste andcost, the customers can cut only the size they need.It is ideal foruse in a variety of drywall applications: Internal or externalcorners. after use it the corner will be planar, straight and moresplendid, because it is easy to apply, so it is very wonderfulmaterials for protecting corners.

Size available:

the size of a roll is 50mmx30m

How to use:

1.Cut flexible metal corner tape into one ofthe two strips with a knife to score and bend. The distancebetween your cuts will depend on how tight a radius you wantto achieve. Apply generous coat of joint compound to a depthof 1/8", covering both sides of the corner the same time. With themetal facing the wall, fold tape at the centre  marginand press firmly into the compound.

2.once the corner is embedded, remove excesscompound with taping knife. After the first coat dries, sandlightly, apply finish coat and feather edges two inches beyondedges of the first coat. If needed apply a second coat6"-10" wide on each side of corner. When dry, sand lightly ifneeded. The wide, galvanized steel strips act as a guideto ensure straight, reinforced angles for both "inside" and"outside" corner needs.