130W CO2 Laser Power Supply for 100W-150W CO2 Laser Tube andLaser Cutting Machine
Power Supply for 130W CO2 Laser Tube

1. Main Features:
1) High output voltage and current: When inputting AC220V andoutputting current up to 38MA, the voltage can be up to 25KV.
2) Response time: ≤ 1Ms(from the time that switch Signal is givento the output current up to 90% of the setting current)
3) Increase the power of laser: Used with 2000mm laser, the peak oflaser power can be up to 150W and the average power is 130W.
4) Dramatically lengthen the service life of laser.
5) Easy Control: The start and stop of laser can be easilycontrolled by TTL level. And there are protection switch to testthe external water, ventilation, etc.
6) Easy control of laser power: Both 0-5V analog signal and PWMsignal can control the laser power.
7) The power supply possesses open circuit protection: Under thecondition of good protective earthing, the power supply can work inopen-circuit for a short time, which could avoid the damage oflaser power supply because of the bursting of laser tube, therebyenhancing the life of power supply.
8) The power supply can take feedback interface which can be usedin closed-loop control and testing the working current oflaser.
9) The power supply adds a new function, that is timely scenejudging which part is damaged, laser tube or laser power.
10) Application: Thick acrylic cut, fabric cut, etc.