Jinyu ceramic fiber include ceramic fiberblanket, ceramic fiber board, ceramic fiber heater, tube,block,  various ceramic fiber non-conventional products. Theproduct is featured with low thermal conductivity and sound heatinsulation. Zirconia coated ceramic setter is another main productof our company, mainly used for the agglomeration of variouselectronic ceramics. Zirconia coating could prevent reaction andadhesion between electronic ceramics and the setter, hence toensure excellent performance of the sinter product.

Ceramic Fiber Board and Vacuum Shaped Products are made bydifferent fire-resistant fibers, non-organic and few organicadhesive mixed in different percentages. The use temperature ofthese products can be varied from 1000 to 1800.

Ceramic fiber module is made of blanket fan folded, or pre-cutblanket stack bonded to form a module, to form a module with cutedges exposed. ceramic fiber including standard ceramic fiber, highpure ceramic fiber, high Aluminum ceramic fiber, Zirconium ceramicfiber.

Ceramic industry: kiln liner, kiln car

Glass industry

Piping heat insulation, common heat resisting material

Other high temperature insulation

Heat preservation materials as the back lines for the kilns inthe field of ceramic

Heat preservation materials as the wall lines and back lines forthe kilns in the field of metallurgy and petrochemical industry

Heat preservation materials as the wall lines and back lines forthe Glass furnace.

Refractory and insulating materials for heat treatmentequipment

The back lines of refractory brick for electrolytic reducingbath in aluminum factory

Materials of  the wall lines and back lines of heat andpyroreaction equipment 

Jinyu Ceramic Fiber Insulated Heaters produce fast, efficient,and reliable uniform heat to temperatures of 700-1150 C.

These heaters are comprised of high quality helically woundFe-Cr-Al alloy resistance wire elements embedded in a rigid body ofvacuum-formed high temperature refractory fiber. This ceramic fiberinsulation has very low weight, thermal mass and thermalconductivity and thus can handle extremely rapid cycling.

The elements are typically mounted flush with the heatedsurface. The diameter of the helically wound element coil is keptto a minimum, reducing the difference between the element andchamber temperature, thus ensuring long heater life. This featureenables the design and manufacture of responsive heating systemsand significantly reduces the risk of overheating the element.

At 1150 C, power (watts) and current (amps) are 3.8% less (andresistance (ohms) is 3.8% more than the rated values.

In addition, Higher temperature ratings, up to 1700 C, areavailable with custom designs. This type heater is comprised ofhigh quality molybdenum disilicide (MoSi2) heating elements.

Note: For more information, such as the latestprice and products catalogue, pls fell free to contact us by mail:jyb(at)jinyuco.com, jarrywu2008(at)gmail.com. Thanks inadvance.