MOQ:1000
Quantity:100
Send Inquiry
- HESHUN SPLINT
- 1.The product is made of multilayer polymer fiber saturated byPolyurethane and polyester.Before use,it needs to be activated bywater.The polymer fiber is in non-woven protective layer,whichmakes patient feel comfortable in use.
- 2.New material of orthopaedics external fixation!New productssubstituting plaster padding.
- 1.EASY-OPERATED DEVICE
- The whole operation is finished within 3~5 minutes without anyheating equipments but by only using the normal-temperaturedwater,which not only eases the labour for doctors,but also savesthe time of operation.
- 2.X-RAY PERMISSIBILITY
- The doctors can examine the broken parts clearly withoutremoving the casting and splint,which ensure the accuracy andintegrity of the operation.
- 3.EXCELLENT AIR-PERMEABILITY
- The holes on the products make good air-pereability and preventskin from infection,itch and smell.
- 4.HIGH STRENGTH
- The strength are five times that of the plaster products,whichcan make the injured part protection more effectively.
- 5.LIGHTWEIGHT
- Heshun Cast and Heshun Splint are only 1/5 heavier and 1/3thicker than plaster products,which makes the pacients feel morecomfortable.
- 6.VARIOUS SPECIFICATION
- The products will satisfy different needs of injured parts andcolor-preference for diff erent ages.
- 7.ENVIRonMENTAL PROTECTION
- Heshun Cast and Heshun Splint are made from polyester or glassfiber.After operation,they can be burnt without pollution.
- How to use:
- 1.Choose proper specification according to need.
- 2.Open the package and take out the splint.Saturate it in waterfor 3-4 seconds and press it 2-3 times.
- 3.Take it out and press out the water.Absorb the water with atowel.
- 4.Plase it on the needed part and fix it with bandage.
- 5.It will be hardened after 3-5 minutes and be capable of useafter 20 minutes.
- Use to Notes
- 1.The hardening of the splint has direct relation to the watertemperature,temperature is high,hardening quickly,temperature islow,hardening slowly.
- 2.The whole operation must be finished in 3-5 minutes,somedelay will affect the shaping effect.Within 10 minutes hardeningtime, the affected part cannot move.
