Cylindrical integral dripper mould is a plastic injection mouldused to produce cylindrical integral drippers which is used to beinserted into a PE pipe to form into integral dripper dripline. Themould can adopt cold runner, hot runner or semi hot runneraccording to different request from customers.

Features for Cylindrical Dripper Mould with ColdRunner:
1. The mould can adopt cold/hot/semi hot runnersystem.
2. The cavity board can be changeable, thus producing cylindricaldrippers with different flow rates with the same mould.

3. The mould adopts S136H (HRC48-50) as cavity insert materialand Japan Punch steel as mould core, which can ensure lifespanbeyond one million shots.

4. The machining accuracy for the mould can reach 0.01mm, androughness as Ra 00.8.

5. The dripper manufacture deviation Cu is less than 1%.

6. The deviation factor for dripper flow rate is less than5%.

7. Mould is designed with 2D/3D drawing

8. Moulds can be designed according to clients’ request todripper flow rate, diameter and length.

9. Mould base is of famous brand suck as LKM.

10. Mould shot period is 12 to 15 seconds.

11.Water circulation is used for the mould cooling.