2)module size:77x47mm
3)Display Mode & Backlight Variations
4)4bit or 8bit parallel interface
Mechanicaldimensions
Feature
1. 20 character * 4 lines display
2. Built-in controller(S6A0069 or compliant)
3. with 4-bit or 8-bit parallelinterface
4. 1/16 Duty cycle, 1/5 Bias.
5. Display Mode & BacklightVariations.
6. ROHS Compliant
Mechanical thickness
LCD module | T1 | T2 | Unit |
Without or EL | 5.0 | 9.6 | mm |
Edge backlight | 9.6 | 14.2 | mm |
Bottom backlight | 9.6 | 14.2 | mm |
Mechanical data
Item | Standard | Unit |
Module size | 77.0x47.0 | mm |
View area | 60.0x22.0 | mm |
Dot size | 0.42X0.46 | mm |
Character size | 2.30X4.03 | mm |
Interface pinconnections
Pin NO | Symbol | Function |
1 | VSS | Power supply for logic(0V) |
2 | VDD | Power supply for logic(5V) |
3 | V0 | Contrast adjustment |
4 | RS | Register select signal |
5 | RW | Read/Write signal |
6 | E | Enable signal |
7~14 | DB0--DB7 | 8-bit data bus |
15 | LED | Power supply for Backlight |
16 | LED- | Power supply for Backlight |
Electronicalcharacteristics
Item | Symbol | Condition | Standard | Unit | ||
Min | Typ | Max |
| |||
Operating voltage | VDD | VDD=5.0V | 4.5 | --- | 5.5 | V |
VDD=3.3V | 2.7 | 3.3 | 5.5 |
| ||
Operating current | IDD | VDD=5.0V | --- | 1.5 | --- | mA |
Recommended LCD driving voltage for normal temp module | VLCD | TA= 50°C | --- | 4.3 | --- | V |
TA= 25°C | --- | 4.5 | --- | |||
TA=-0°C | --- | 4.8 | --- | |||
Backlight voltage | VLED | Y-G | --- | 4.2 | --- | V |
Backlight current * | ILED | VLED=4.2V | --- | 150 | --- | mA |
Operating temperature | To | --- | -20 | --- | 70 | °C |
Storage temperature | TS | --- | -30 | --- | 80 | |
*Note: backlight current value is as withouton-board resistor
