Brand:Jinqiao
MOQ:1
Quantity:50
Send Inquiry
SPRAY DRYER (emulsion sprayingmachine)
ZPG Spray Dryer For Chinese TraditionalMedicine Extract
Features:
With a first drying speed, themachine only needs more than ten seconds and less than twentyseconds. It has the instant dryingfeature.During the drying, the temperature of the liquiddrops is relatively low. This is particularly suitable for dryingthe heat sensitive materials so as to keep the color, smell andtaste for the materials.
Inorder to prevent that things, like sticking to the wall, appear inthe drying tower, the device is equipped with a special structurethat can effectively avoid the thing of sticking to thewall.
Thespecialwind supply system for the final products will separate thedried products with the hot and wet air in the system in time toavoid the possibility that the dried final products may absorb themoisture and form the blosk. Description:Spray drier for Chinese traditional medicine(drying equipment/drying machine) is suitable for drying theChinese traditional medicine products that are low in fusion pointand high in the sugar contents.The machine owns the characteristics that itsproducts do not sticky to the walls and that they are uneasy toabsorb the moisture and etc.The technological conditions for thespray and drying are decided according to the features and propertyof the products to be dried for the machine. The pharmaceutical spray dryer is high inautomation is easy in operation. Itmeets the GMP requirements. the calculation andselection of the technological parameters are totally completedthrough computers. The successful development of this machine hassettled the technical difficult point for which it is verydifficult to use the spray and drying technology for Chinesetraditional medicine products with low fusion point and high sugarcontents for many years. Applications:Heated by a heater, the air enters into the hotair distributor on the top section of the drying tower. Afterpassing through hot air distributor, the hot air enters into thedrying tower uniformly and moves in the spiral state.At the same time, the material pump sends thematerial liquid to the centrifugal spray on the top of the dryingtower. The material liquid is sprayed into very fine mist-statedrops. The surface area that the material liquid contacts the hotair is increased greatly. The water is evaporatedfast.In a very short time, the products are dried intothe dried final products. The dried final products are separatedwith the et air by the whirl separator. The dried final productswill pass through the material collection whirl room at the bottomof the whirl separator and are sent to the small whirl separatorfor separation by the dried air. The final products will becollected in the material collection barrel.Theexhausted gas will be discharged through induced draftfan.
Allthe hot air system, blowingsystem and air sending system of thedrier have the first effect, middle effect and sub-high effectfilters and other filters. All the air entering the drying systemhas passed the filtering treatment. All thesections of contacting the materials use the stainless steel andmeet GMP requirements.
Changzhou Jinqiao Spray Drying and Engineering Co., Ltd
www.jlspray.com



