Breathalyzer

INSTRUCTIONS

1) Plug the unit into the bottom of your iPhone
2) Turn your iPhone ON. Ensure the power remainsON. For example, make sure the screen on your iPhone isON, as the breath testers power comes from the iPhoneremaining ON. There are no batteries to insert into the breathtester.

Hold down the power switch for 3 seconds on the unit untilthe screen comes on. It will then show "wait" andalso " 0 "

3) The unit will then show 'Blow' and count downfrom 10. You should blow for 10 seconds as soon as you see theword 'Blow'. After 10 seconds, the unit will beepand then show your reading

4) There are different results on the screen
A  The percentage is less than <.02%BAC The lightwill be green
B  The percentage is morethan > .02% BAC but lessthan < .05%BAC The light will be orange andthe  slow beep alarm will soundC  Thepercentage is more than >.05%BAC. The light will bered and the quick beep alarm will sound

5) You can adjust the unit from %BAC to MG/L bypressing the power button on unit

6) The power will turn off automatically on the unit aftera few seconds after the result. You can also simplydisconnect the unit from the iPhone when finished to turn off

important: If your iPhone turns off while using the breathtester, it will also turn off the breath tester.
Always ensure the iPhone screen remains 'on' while usingthe unit.

Precaution
The measurement of this device should only be used asa guide. The reading is not legally binding and cannotbe
Used in a court of law. The safest policy is to alwaysavoid drinking and driving. The result of the bac is for
Reference only and the manufacturer does not take any legalresponsibility.
- always wait at least 20 minutes after drinking, smokingor eating before taking a test
- for accurate results, wait at least 3 minutesbefore repeating a test
- do not use any chemicals / alcohol etc to cleanunit
- modifying or tampering with the unit can result inmalfunction.