Price:Negotiable
MOQ:50

Send Inquiry

: 5000 * 10mm, 5050 lamp beads, one meter 30 lights, 5M /Roll, 7.2W/Meter, Color:Red/Yellow/Blue/Green/White/Warm White.
(3) Waterproof grade: IP68
(4) LED emitting angle: greater than 140 degrees
(5) Working temperature: -50-70 degree
(6) Power supply: high-quality constant voltage power supply
(7) Use FPC

 

(8) Warranty: 24 months

 

Product description:

 

SMD lamps with the production of the company arehighlighted 5050SMD flexible printed circuit board, with energysaving, high brightness, low attenuation, easy shear install andfeatures, the life expectancy of up to 80,000 hours.
This product as a backlight is widely used in interior cove, windowdressing, thin light boxes, light word, hotels, shopping malls andother high places.
 
Product Features:

 

1 Out of every three LEDs to form a loop can bearbitrarily cut off along the tangent above, without damaging otherparts.
2, Made by the FPC board, can easily bend, can be arbitrarily fixedin the contour surface.
3, The size and number of LED according to the requirements ofproduction, small size, a variety of colors for customers tochoose.
4, Using LED as a regular chip production, high brightness, lowlight fades, the color of one to long life, according to the guestsdesign lights away.
5, For the path and outline signs, illuminated signs, transparentand non-transparent material around the light:

 

Installation Instructions:

 

(1) This product on the back affixed with double-sided3M strong adhesive tape, simply tear off the protective filminstallation directly affixed to the desired location.
(2) The maximum number of connections this section light singledriver for 2 exceed the number of, and to raise the power drivecircuit.
(3) Calculate the electrical power, design and distribution scheme:a single light bar of the budget number of LED lights X power =power consumption of the total power (recommended power matching toleft margin, 80 percent use the rated power)

 

Installation:
(1) Note that the output DC voltage of the switching power supplywith the rated voltage of the lights, do not directly use the AC220V point lighting strips.
(2) To ensure that the light bar install solid and reliable, it isbest to use special 3M glue fixed.
Please scissors marked by shearing, such as outdoor installation,you must deal with the middle of wiring at waterproofingmeasures.
(4) Do not excessively bend pull light, the minimum angle of notless than 10 degrees.
(5) This product 24V six lights and a cut, 12V, three lights and acut.
(6) To be installed in anti-static environment, the proposedoperator to wear a static ring.