Brand:Bell or OEM
MOQ:1
Quantity:1
P8 Full Color LED Video Wall
Model:BELL-IFP8 | |||
Pixel pitch | 8mm | Module size | 256x128mm |
Pixel configuration | 1R1G1B | Module density | 32x16dots |
View angel | 140°/140° | Pixel density | 15,625dots/??? |
LED encapsulation | SMD3528 | Refresh Rate | ≥800Hz |
Driving Method | 1/8 scan, constant current | Max power consumption | 750w/??? |
Brightness | >1100nit | Type Power consumption | 230 w/??? |
Working voltage | AC110/220V | Working temp | -20??? to 60??? |
Best viewing distance | >3 m | Dead dot rate | <0.0001 |
LED parameters | R: 625nm±5.0nm; | MTBF | >5,000hours |
G: 525nm±2.5nm; | Gray Level | 8192grade | |
B: 470nm±2.5nm; | Lifespan | >100,000hours | |
Image processing | Video denoising, rapid motion compensation, edge sharpening, edge smoothing, color coordinate conversation&control , grey scale transformation etc | ||
Brightness uniformity | Ratio of min pixel brightness /max pixel<0.9 (When each color reaches its highest brightness) | ||
Effective control distance | Cat-5<100M,Multi-mode fiber:<500M;Single-mode fiber<20Km | ||
Color Temperature /contrast | Brightness and contrast of red, green and blue can be adjusted by software,100 scales are available, color temperature is adjustable | ||
Input signal | RF,S-VIDEO,RGB,RGBTV,YUT,YC,COMPISITION | ||
Control system | Sending card Receiving card Hub cardDVI Card PCTV Non-liner cardMuti-funcational card(Optional) Video processor(Optional) Fiber Transmitter(Optional) | ||


