Brand:KELVIN
MOQ:200
Quantity:100
RF transmitter duplicator KL300-4K
Operating voltage: DC12V
Operating current: 10MA
RF transmitter duplicator KL300-4K
I . Technical parameters
Operating voltage: DC12V
Operating current: 10MA
Operating frequency : 315/433.92 MHZ (we can do customizedfrequency)
Ambient temperature : -20 °C ~ 50 °C
Kelvin 4-Channel RF Wireless Remote Control Duplicator for Cars,Garage Doors , Gates doors, Alarm systems etc. Fixed frequency(433.92mhz or 315mhz) for copying 99.99% common fixed and learningcode remote controls.
Face to face copy the functions of your original remote by this4-channel RF remote control duplicator with code learning functionsand you'll always have a back up.
Duplicate Your Existing RemoteControllers: Vehicle central lockingsystems Garage doors Electronic gates Electrical appliances Car sunroofs Heating systems
Easy to install and use, the 4 channel remote control systemlets you take control of your gadgets, car and home orgarage.
Works with the following remote control modules (please checkyour existing remote control before ordering): Your remotes alsoshould be Fixed code or Learning code.
•2260, 2262, FP527, HT12D , HT12E , PT2240, S026-1 ,S026-2 ,S026-3 ,S026-4, SMC918....etc Please notethis does not copy rolling codeMethods of operation 1, Clear outcode:To Clear up test stored rf signal memory from factory bypressing the locking key and unlock the key at the same time, twoseconds later, LED indicator light flashes three times, followed bya continuous fast blinking. Indicates that the remote control codesstored has been cleared out.2, Duplicating (learning) Handsare holding remote control , and the other are holding theduplicating remote control, 2 remote controls put together as closeas possible, while pressing the remote controls two matchbutton,(eg: A-A’,B-B’) three seconds later, LED indicator lightflashes three times, followed by a continuous fast blinking. Thisindicates that this copy of the remote control buttons are same ascopied on the remote control button codes . Several other keys arealso according to the above approach to learning.3, Recovery code If the code copied have been mistakenly removed theremote control, you do not worry, the remote control can restoreyourself. Method is pressing (up-down eg: locking key and bell key)two buttons (metal shell remote control on the left, the plasticshell remote control on the right) at the same time ,3 secondslater, LED indicator light flashes three times, followed by acontinuous fast blinking. This indicates that the original remotecontrol codes have been restored.The other way, you can delete alland relearn them again.
RF transmitter duplicator KL300-4K
