Brand:McLELLAND
MOQ:1
The McLelland AVD-800P is the most fantastic & powerfulaudio and video control center, the AVD-800P System consists of theAVD-800P Controller/Amplifier, you can easily program and control 2audio,4 video /audio and 4 security camera module inputs to 8different rooms (zones) in your house or any big facilities. Itincludes 8 individual control keypads, and 8 IR Emitters(additional keypads can be ordered as needed). When combined withalmost any 8 IR controlled Audio / Video source components (CD,DVD, VCR, Tuner, Satellite 1, Satellite 2, etc.). The AVD-800PSystem controls, distributes and amplifies your favorite sound andframe to as many as 8 zones. With functional of AVD-800P andcareful planning, can easily save money and time for both installerand homeowner. With multi Audio and Video source inputs, and mulitzone-specific outputs, any source can be selected and controlledfrom any zone. Additionally, multiple users can utilize multiplesources anywhere, throughout the home, at the same time.
Feature:
- Output Power: 20W 8 Ohms x 8 Zone (16 Channels)
- Phoenix Connectors: For audio signal outputs.
- UTP CAT5 Transmission System
- 8 RJ45 Connectors: For keypads including video signaloutput.
- 10 Source Inputs: 2 audio 4 video/ audio and 4 camera moduleinputs are acceptable.
- Maximum Expand System: 16 x AVD-800P.
- Independent IR Emitter output
- Trigger On and External Mute jack on rear panel.
- The Control of Keypad: Volume / Treble / Bass / Source
- The Control of IR Remote Control: Volume / Treble / Bass /Source / Mute / Balance
- DIP switch for AGC level and address select on rear panel.
- Power Supply: AC 115V 60 Hz / 230V 50 Hz, Can be switched.
- Dimension: D 413 x H 88 x W 427 mm.
Re-In/Output 10 Audio/Video sources to other AVD-800P with IDC FlatCable.
Preamp Line Out (1-8)
L+R stereo RCA Jacks for connecting Zone Audio Output to anexternal amplifier. For use with applications where either morepower is required for Zone or passing to a Dolby Pro compatiblereceiver for theater quality audio in zone.
Video Camera Input
link by UTP CAT-5 cable between main units to camera (powered bymain unit)
Zone Speaker Output (1-8)
Use the included 4-conductor plug-in connector, (8 included) toconnect speaker wires to the AVD-800P.
Audio/Video Sources Input:
Gold-plated RCA Jacks for composite video input from sourcecomponents.
Audio Sources Input
For stereo line level audio input from source.
Inter Data Loop
This RS-485 data controller can loop control up to 16 AVD-800Punits of expand to 128 places.
AGC/Address Select
Using the AGC (Auto Gain Control), no need to regulate the volumeof each source, the volume of output will automatic to be ranged atthe same level.
Keypad Output (1-8)
Each Zone has one RJ-45 jack for keypad interface. Connect the zoneCAT5 cable to the Keypad Output Terminal n the AVD-800P keypad rearpanel.
IR Remote Extender (1-8)
3.5mm Mono Mini Phone Jacks.
Control Pad
Control Pad: The Control PAD is the controller which connected withthe mail product; it can control the 8 zone`s keypads.
SYS Trigger:
The System Trigger Jack will be showing the H (DC 12V) output whenthe all 8 zone sources were powered on or at least one zone ispowered on.
The System Trigger Jack will be showing the L (DC 0V) output whenthe all 8 zone sources were powered off or at least on zone ispowered off
External Mute
This will allow connecting a microphone. While using microphone,all zone will mute automatic.
Call LED
The Call LED Jack (D-SUB 9 Pin) on the rear panel can connect withCall LED Display Box, when user press anyone of the zone "Call" keypress, the corresponding zone LED will be illuminant and activesounder.
AC Power Input
Standard IEC 3-Conductor AC Line Cord Receptacle for plug-in of a3-conductot power line cord.
AVD-KP1 Control Keypad
In-wall style keypad controller link by CAT5 cable to mainunit for sources selector and video O/P.
The AVD-KP1 keypad controllers contain the selected sources bysimply pressing one of the keypads. All buttons are made by softrubber LED back lights. The center of the keypad is amulti-function cursor array for controlling source/zone componentsselection; adjust zone bass/treble/volume, and also features IRpass-through and /confirm/iation. Build-in video output I/O and paniccall buttom (hold 3 sec).
Available in 3 colors-almonds, black, ivory and white.
HRC-I Handheld IR Remote Control
Features:
Adjustable source selection, treble,bass,volume and balance
No programming required, work right out of the box
