Description Ethernet to Fiber Optic Media Converter complieswith IEEE802.3 and IEEE 802.3u Standards. This Fiber Mediaconverter enables network managers to connect 10 Mbps and 100 Mbpstwisted pair network segments and active equipment to fiber opticcabling more cost-effectively than ever.WDM Technology CombinesDual Fiber Cables into Single Fiber .Greatly save the Installationcost of Expensive Fiber Cable. Both a media and data rateconverter, features 10/100 auto-negotiation on the twisted pairport while the fiber port operates at 100 Mbps. This Fiber mediaconverters are ideal for any premises FTTD, LAN-to-LAN orLAN-to-WAN fiber networking applications. Featrures 1. Autonegotiation function allows UTP port to select the transmissionmode of 10/100M and Full Duplex or Half Duplex. 2. UTP portsupports MDI / MDI-X auto crossover. 3. Multiple optical interfaceto be chosen: SC, ST or FC, singlemode / multimode 4. Supporting1552 Byte packet 5. Internal circuit of prevented thunder couldgreatly reduce damage of the converter caused by thunderboltinduction. 6. Design of internal or external power supply forselection by users Specification: Standard Protocol IEEE802.3 10base-T standard IEEE802.3u 10/100base-TX/FX standard IEEE 802.3dstandard. IEEE 802.3Q standard. Band Width RJ 45 Port:10/100MbpsOptical Port: 155Mbps Mode Fiber Single-mode fiber: 8.3/125,8.7/125, 9/125 or 10/125μm Transmission Distance Connectors UTPRJ-45 SC/ST/FC Fiber connector Operation Mode Full /Half duplexmode LED Indicators POWER, FPL,10/100, FRX, TRX , FDX. Power SupplyExternal DC-48V,DC24V,DC12V,DC5V Internal AC110-250V/50Hz DC-32~-72V Power Consumption ≤5W Environmental Parameters WorkTemperature 0°C~50°C Storage Temperature -40°C~70°C Humidity 5%~90%non-condensing TP Cable Cat5 UTP cable (the max distance up to100m) Singlemode Multimode Fiber Cable 8. 3/125, 8. 7/125, 9/125,10/125μm(the max distance up to 20 -120km) 50/125, 62. 5/125μm(themax distance up to 2km or 5km) MTBF (Hours) >50000Dimensions(mm) External power supply 94mm*70mm*25mm Internal powersupply 140mm*110mm*30mm Socket Card 157mm*128mm*31mm Gross WeightExternal power supply 0.4 kg Internal power supply 0.8kg SocketCard 1.0kg Emission/Safety FCC Part 15 , Class A, Rosh and CE MarkLED indicators: The LED indicator lamps serve as device monitoringand error display. The following explains each LED indicatorOrdering information: Network Application;