The square pressure polishingmachine strength controlled by four angle, thus the pressure ismore precise to control and the final products has higherprecision.
For PC terminations above 95% could pass 3D interferometer test,while for APC terminations this rate keep 90%.

Each polishing jigfor this machine is available as LC,SC, ST,FC,MTRJ,E2000 PCconnector as well as angle polishing

Mainfeatures:

May process each kindof standard fiber optic connectors, such as FC/UPC/APC,SC/UPC/APC,ST/UPC/APC, LC/UPC/APC, ,MU/UPC/APC, MTRJ,E2000/UPC/APCetc.

Convenience foradjusting pressure, unloading and replacing jigs.

Designed for volumeproduction , high productivity(Can polishing 18-40 connectors pertime)

Excellent connectorand face polishing quality, the percentage of products sent backfor repair is very low.

Save material and lowcost for grinding.

Easy to use andstable.

Display grindingspeed which can be adjusted any time.

Toothed gearing, morestable and deep-set.

Made by high quality,hardened steel S136 imported from Germany

Using the good motorsimported (ensuring the movement stable underultra long time)
Using the Japanese NSK bearing ( ensuring the internal structure tobe stable in the high-speed operation, extending the workinglife)
The electron primary device is imported from OMRON (ensuring theelectrical specification stable)
Ferrule diameter:

2.5 mm (0.0984inch)1.25mm(0.0492 inch).

Ferrulematerial:

Zirconia(ZrO2),Quartz capillary, Glass materials, Colophony materialStainless steel and titanium alloy

Mainparameter:

Machine WorkingVoltage: AC220V(AC110V can be offered)

Polishing chassisdiameter:127mm

Polishing chassisbeating:≤5um

Machine netweight:23KG

Machinesize:250L*220W*300H

Polishing timesetting:0~99 hours 99 Minutes 99second