Description
UVCL-300, which is 365nm Ultra-Violet light source. It adopts the circuit of the high-tech, and precise control the ultraviolet. Also they have realized the high intensity, low temperature rise, long working life, low cost, environmental protection and energy saving features through the professional optical lens focus. The internal system has used the microcomputer intelligent to control. To make the operation interface more conveniently and friendly and the internal system has used the microcomputer intelligent to control. Like this also to make sure the secure, easy manipulate and efficient in process.

Parameters
1. Power: DC12V/1A On/Off Power Switch
2. UV LED Life: 50, 000 hours
3. UV LED Wavelength: 365nm
4. Features:
I. 3 digit digitron display the intensity of illumination and irridiation time.
II. Rotary adjustment button with indicator.
III. Hand control and pedal switch double trigger.
IV. Safety lock to prevent mis-operation.
Measurement
Size: L150mm*W115.5mm*H48mm
Weight: 910g
3. Package Weight: 1950g

Operation Instruction
ON: After connected the DC12V and take SAFETY -LOCK ON as figure 3-2, POWER is ON, then the system is working.
OFF: POWER is OFF and take the SAFETY-LOCK OFF;

SETTING
TIME SETTING: In the Standby mode, push and hold the ADJUSTMENT button for 2 seconds to TIME SET. TIMER(S) bright and to rotary the button adjustment the time. Anti-clockwise rotation is reduce and clockwise is add. Every turn time value change is 0.1s, between 0.1-99.9s. Soft press ADJUSTMENT and finish the SET. Entry the BRIGHTNESS set mode next.
BRIGHTNESS SETTING: OUTPUT bright and rotary the button adjustment the brightness. Anti-clockwise rotation is reduce and clockwise is add. Every turn brightness value change is 1%. Between 0%-100%. Press the ADJUSTMENT button for 2 seconds back to Standby mode, soft press ADJUSTMENT and back the TIME SET.
Start Work
Start: In the Standby mode, press the TRIGGER button or step the PEDAL SWITCH to take the UV light ON. Digitron display the work time and start time from 0. Time is over and the light OFF. Entry into Standby mode.
Temporary Stop: In the working mode and press again TRIGGER button or step the PEDAL SWITCH. Power OFF, then the machine back Standby mode.

Safety and Precautions
1. Must be worn the special UV protective eyeglasses when you are using the machine.
2. Under any circumstances, to avoid the damage of your eyes, please do not directly looks the UV LED by your naked eyes.
3. Please do not violate the operating requirements and precautions. Otherwise, any damages and losses, not responsible for our company.