IEC60695-11-5 Needle Flame Tester

1. Introduction:

Comply with IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005 standard.
With predetermined size (Φ 0.9 mm) needle burner, in 45; Angle burning product, measure the fire risk by product light-off or holde burning time.
Used for lighting, low voltage electric appliance, household appliances, electric machine, motor, electric tools, electronic instrument, electrical instrument, electrical connector such as electrical and electronic equipment and parts, components of research, production and quality inspection department, also suitable for insulation materials, engineering plastics.

2. Technical parameters

Needle burner inner hole diameter Φ 0.5mm ± 0.1mm, Diameter, 9mm≤ Φ , length ≥ 35mm, stainless steel
Burner angle 0, ° 20° , 45° (adjust flame height)
Thermocouple Ø 0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature-40° C~ 1100° C
Burning time 0-999.9 s ± 0.1 s adjustable (usually selected for 30s)
Hold Burning time 0-999.9 s ± 0.1 s, automatic recording, manual timeout
Flame Height 12mm ± 1mm (with height measurement instruments)
Flame Gas butane gas/Butane gas, min. 95% purity (can use bottled lighter gases)
Temperature Test Range 0~1000° C
Flame Temperature Requirements from 100 ° C ± 2 ° C liters to 700 ° C ± 3 ° C time in 23.5 seconds ± 1 seconds
Standard Copper Block 4mm± 0.01mm, weight. 0.58g± 0.01g before drilling. Cu-ETP
Test process automatic control, independent convulsions
Chamber ≥ 0.5m3
Size W1100mm× D700mm× H1300mm, exhaust hole Ø 100mm
Control Using single chip microcomputer + touch screen control
Consult standard GB/T5169.10-2006, IEC60695-2-10: 2000, UL746A
Power Supply 800VA, 220V, 48-60Hz

3. Service we can provide:

1. High quanlity guarantee.
2. Shipment/Freight with professional documents.
3. Packing as your request, with photo before shipment.
4. Professional after-service from our engineer team.
5. Warrantly period one year.

4. Our advantages:

Professional technology support.
Full experience of large numbers containers loading in Chinese sea port.
Fast shipment by reputed shipping line.
Package as buyer's special request.
Best service after shipment with emails.
Cargoes photo before and after loading into container.

5. Our concept:

1. Client is first. We are trying to bring maximum profit to our clients and we only share small.
2. Credibility is the most important.
3. Quality control is our life.
4. Great sense of responsibility.
We will be responsible for not only our products, our clients, our suppliers, also the society.