Internal blowout prevention (IBOP)
The internal blowout prevention (IBOP) control valve contained in the pipehandle is a ball type, full size, internal opening safety valve. A second manually operated lower valve (optional) can be utilized to assist in well control. Both valves bave 6 5/8 in. Regular RH connections and 15000 pis pressure ratings.
The remotely controlled upper IBOP valve is opened and closed by a yoke and hydraulic cylinder that is controlled from the driller's console using an electric solenoid valve. A shell housing rotates with the valve body and moves up and down to drive a small crank arm on each side of the valve stem. The housing is actuated by a cylinder through a non-rotating actuator ring. The hydraulic cylinder is attached to the torque arrestor frame.
The optional lower valve is the same type as the upper except it must be manually opened and closed with a wrench. Both valves remain in the string at all times and are readily available by connecting the TDS-11SA to the drill string. The lower valve can be broken-out from the upper valve using tongs after swinging the torque arrestor frame out of the way.
After breaking-out the lower valve, the TDS-11SA can be hoisted away, allowing room to install the appropriate subs and valves for well control operations. After removing the lower valve from the upper valve on the TDS-11SA using conventional rig tongs, the lower valve remains connected to the drill string for well control purposes. A crossover sub is included with the system to allow connection of the drill stem to the lower valve.
Specifications
1)IBOP for Top Drive used for top drive
2)API specification
3)high pressure
4)Include Upper and Lower IBOP
IBOP for Top Drive
IBOP for Top Drive used for top drive. It includes Upper IBOP for Top Drive and Lower IBOP for Top Drive. They are used for top drive drilling system with joined one by one.
The seals for upward and downward pressures provide dependable high-pressure service. It has a pressure rating of 10, 000psi or 15, 000psi respectively at the factory. The bore of the valve body and all internal parts are special treated to prevent damage from corrosion and have a long life service.
Type O. D. I. D. Connection(API) OAL
DXS187 Upper IBOP 187
7-23/64) 77.8
(3-1/16) 6-5/8REG 572(22-1/2)
DSS187 Lower IBOP 523(20-19/32)
DSS197 Upper IBOP 197
7-3/4) 77.8
(3-1/16) 6-5/8REG 572(22-1/2)
DXS197 Lower IBOP 523(20-19/32)
DSS216 Upper IBOP 216
8-1/2) 77.8
(3-1/16) 6-5/8REG 600(25-5/8)
DXS216 Lower IBOP 512(20-5/32)
DSS254 Upper IBOP 254
(10) 102
(4) 8-5/8REG 800(31-1/2)



