SmartDS Series
Model SDS6062
Bandwidth 60MHz
Sample rate(Real time) 500MS/s
Horizontal Scale(S/div) 5ns/div~100s/div, step by 1~2~5
Rise time (at input, typical) ≤ 5.8ns
Channels Dual
Display 8" color LCD, TFT display, 800x600 pixels, 65535 colors
Vertical System Vertical resolution (A/D) 8 bits Resolution (2 channels simultaneously )
Vertical sensitivity 2mV/div~10V/div(at input)
Displacement ± 10div(5mV~10V)
Analog Bandwidth 60MHz
Single bandwidth Full bandwidth
low frequency ≥ 5Hz
Rise time (at input, typical) ≤ 5.8ns
DC gain accuracy ± 3%
DC accuracy(Average) Average>16: ± (3% rdg + 0.05 div) for V
Measurement Cursor measurement V and T between cursors
Automatic measurement Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, DelayA-B, DelayA-B, +Width, -Width, +Duty, -Duty
Waveform Math +, -, , × , /, FFT
Waveform storage 15 waveforms
Lissajou's figure Bandwidth Full bandwidth
Phase difference ± 3 degrees
Communication interface USB, support USB flash disk storage, SVGA
Trigger Trigger level range ± 6 divisions from screen center
Trigger level accuracy ± 0.3div
Horizontal Trigger displacement Pre-trigger: 655 div, Post-trigger: 10 div
Trigger Holdoff range 100ns~10s
Edge trigger RisingFalling
Pulse Trigger Trigger condition Positive pulse: >, <, = negative pulse: >, <, =
Pulse width range 24ns~10s
Video Trigger NTSCPALSECAM
Slope Trigger Trigger condition Positive pulse: >, <, = negative pulse: >, <, =
Time setting 24ns~10s
Alternate Trigger Edge, Pulse, Video, Slope
Waveformrecord Waveform quantity 1~1000
Interval time 1ms~1000s
Display 8" color LCD, TFT display, 800x600 pixels, 65535 colors
Power Supply 100~240VAC RMS, 50/60Hz, CAT II
Power consumption < 18W
Dimension Weight 340mm(L)× 155mm(H)× 70mm(W) 1.8kg (without battery)

Deep memory digital storage oscilloscope:
10M record length with highest 500MS/s sample rate; AutoScale function to simplify the operation; Smart design body with easy workplace; Come with SVGA port to enlarge waveform display; 8 inch high definition TFT display (800 x 600 pixels); Super capacity lithium battery for optional.

Main Features:
1. Bandwidth: 60MHz
2. Sample rate: 500MS/s
3.10M record length for each channel
4. Autoscale function
5. Large 8-inch 800x600 pixels display
6. Pass/Fail function
7. SVGA output
8. Waveform record & replay
9. Battery (Optional)

Application:
Design and Debug Circuit function test Mixed signal circuit testIdentified signals logic information Education & Training