metalcorner tape

2.Flexiblemetal Corner Tape is an Innovation in Drywall. Our drywall productshave always LED the way in providing innovative solutions for boththe profe-ssional and do-it-yourselfer. It is made of paper jointtape bonded to two corrosion resistant metal strips and aneasy-to-apply polymer reinforcement that eliminates the need tofinish drywall corners with metal corner bead. Traditional cornerbead is difficult to install, tends to crack and is only availablein standard lengths.
3.This flexible corner tape is easy to apply like all drywallproducts and has so many benefits. You can cut to length to reducewaste and cost. It can be used on old and new drywall and plasteras well as all inside and outside corners.
4.Application:
Flexible metal Corner Tape isideal for use in a variety of drywall applications: Internal orexternal corners which are 90 degrees or not 90 degrees, for manualapplication only.

For example:Archways, curves, vaulted ceilings, coffered ceilings, bay windows,etc.

Performanceinclude:
High flexibility, replaces traditional paper metal flex tape andmetal corner bead.

Professionalsuse it for all off angles. Fast, easy installation reduces laborcosts.

Unique,patented nose coating minimizes scuffing and fuzzing when finishingand sanding, strong paper tape covering provides excellent adhesionof joint compounds, textures and paints.

Saveswaste-- cut only the amount you need. Great for curves, arches andunusual angles.
5.Specification:

                                              Cornertape

Thecorner tape comes in consumer and contractor roll sizes varying insize from 7.6m (25''), 30m(98.4") and 30.5m (100'') rolls. Otherlength upon customer''s request.
6.Packaging:
Supplied in a cardboard dispenser, 10 or 20 rolls per pack
7.How to use:
1. Cut flexible metal cornertape into one of the two strips with a knife to score and bend. Thedistance between your cuts will depend on how tight a radius youwant to chieve. Apply generous coat of joint compound to a depth of1/8", covering both sides of the corner the same time. With themetal facing the wall, fold tape at the center margin and pressfirmly into the compound.

2. once thecorner is embedded, remove excess compound with taping knife. Afterthe first coat dries, sand lightly, apply finish coat and featheredges two inches beyond edges of the first coat. If needed apply asecond coat 6"- 10" wide on each side of corner. When dry, sandlightly if needed. The wide, galvanized steel strips act as a guideto ensure straight, reinforced angles for both "inside" and"outside" corner needs.
8.Caution: Apply Flex metal Corner Tape only at the recommendedtemperatures of the joint cement used. Store tape in closed cartonsat normal room temperature in an enclosed, dry shelter.
9.Limited Warranty: This product is warranted to be uniform and ofthe highest quality. Our company shall not assume anyresponsibility, directly or indirectly, for any loss caused byapplication of this product not in accordance with directions. Alllabor costs are excluded from this warranty. Our liability underthis warranty shall in no case exceed the purchase price of thequantity of our product used with respect to which damages may beclaimed. All claims shall be considered null and void unlesssubmitted within 30 days from date of allegeddefect.