Brand:SEALOP
MOQ:10
Quantity:100
Two component flexible construction waterproof membrane
1High bond performance
2Good water resistance
3Good alkali resistant
Two Component Flexible ConstructionWaterproof MembraneSimple introduction:The product is developed inthe laboratory by the company. It has high strength, high bondperformance, two component flexible waterproof special binder, ismodified by polymer additives, dry-type cement-based bondingmaterials and a special deployment of high ratio of polymer latexcomposition, especially for bonding water absorption<1% ofceramic tiles, granite, glass mosaic and other demanding materials.This product has the following characteristics:l high bondperformancel good water resistancel good alkaliresistance Application:grade ceramic tile, glass mosaic,etcConstruction points:1,the base surface must be dry, clean, nooil and so on. The base surface of porous or too hot, theapplication of water based surface slightly moist, but not soakingthe tile.2,use power: liquid=3 bags(25kg/bag):1barrel(20kg/barrel),the product should be used in 90 minutes.3.use knife to smear theproduct to the back of the tile, press it to the right place.
4.ground construction should use 10mm×10mm×10mm knife to smear,wall construction use 6mm×6mm×6mm knife to swear.
5.After tile adhesive bonding layer thickness of not less than1.5mm; gap between the tile should not less than 1.5mm.6,can usethe common method to do the constructionNotes:1.constructionunder5~ 35°C. 2.Don’t do theconstruction outdoors in the rainy dayPackage and storage:3bags ofpowder (25kg/bag), 1 barrel (20kg/barrel). Stored in a cool dryplace, unopened product can be stored for 6months.
Two Component Flexible Construction Waterproof Membrane
