Brand:CISCO
MOQ:1
Quantity:10
Send Inquiry
WS-C2960-48TT-L Product Overview- Interfaces/Ports
- Total Number of NetworkPorts: 48
- UplinkPort: Yes
- Number of Network (RJ-45)Ports: 48
- Media& Performance
- Media TypeSupported: Twisted Pair
- Twisted Pair CableStandard: Category 5
- EthernetTechnology: FastEthernet
- NetworkTechnology: 10base-T
- NetworkTechnology: 10/100base-TX
- Network& Communication
- LayerSupported: 2
- Management & Protocols
- Manageable: Yes
- Management:
- Cisco Network Assistant
- CiscoWorks Support
- Device manager
- Cisco Express Setup
- CiscoView application
- Cisco Network Assistant Software
- Trivial File Transfer Protocol (TFTP) reduces the cost ofadministering software upgrades by downloading from a centralizedlocation
- Network Timing Protocol (NTP) provides an accurate andconsistent timestamp to all intranet switches
- Cisco IOS CLI support provides a common user interface andcommand set with all Cisco routers and Cisco Catalyst desktopswitches
- Cisco Service Assurance Agent (SAA) support facilitatesservice-level management throughout the LAN
- Switching Database Manager templates for security and QoS allowadministrators to easily adjust memory allocation to the desiredfeatures based on deployment-specific requirements
- VLAN trunks can be created from any port using standards-based802.1q tagging
- Up to 255 VLANs per switch or stack and up to 128 spanning-treeinstances per switch are supported.
- Four thousand VLAN IDs are supported
- Voice VLAN simplifies telephony installations by keeping voicetraffic on a separate VLAN for easier administration andtroubleshooting
- Cisco VTP supports dynamic VLANs and dynamic trunkconfiguration across all switches
- SNMP v1, v2c, and v3 and Telnet interface support deliverscomprehensive in-band management, and a CLI-based managementconsole provides detailed out-of-band management
- Cisco Discovery Protocol Versions 1 and 2 help enable aCiscoWorks network-management station for automatic switchdiscovery
- PowerDescription
- InputVoltage: 110 V AC
- InputVoltage: 220 V AC
- PowerSource: Power Supply
- Redundant PowerSupply: Yes
- PhysicalCharacteristics
- Height: 1.7"
- Width: 17.5"
- Depth: 9.3"
- Weight(Approximate): 8.00 lb
- Miscellaneous
- PackageContents:
- Catalyst 2960-48TT Ethernet Switch
- Catalyst 2960 Switch Getting Started Guide
- Regulatory Compliance and Safety Information for the Catalyst2960 Switch
- AC power cord
- One RJ-45-to-DB-9 adapter cable
- Mounting kit containing:
- Four rubber feet for mounting the switch on a table
- Two 19-inch rack-mounting brackets (also used for wallmounting)
- Six Phillips flat-head screws for attaching the brackets to theswitch
- Four Phillips machine screws for attaching the brackets to arack
- One cable guide and one black Phillips machine screw forattaching the cable guide to one of the mounting brackets
- One Redundant Power System (RPS) connector cover (for wallmounting)
- Two Phillips pan-head screws (for attaching the RPS cover)
- Four Phillips truss-head screws (for wall-mountingbrackets)
- AdditionalInformation:
- 64 MB DRAM
- 32 MB flash memory
- LAN base Image installed
- Configurable up to 8000 MAC addresses
- Configurable up to 255 IGMP groups
- Cisco Catalyst 2960-24TT: 245,213 hr
- Superior Redundancy for Fault Backup
- Integrated Cisco IOS Software Features for BandwidthOptimization
- Advanced QoS
- Granular Rate Limiting
- Networkwide Security Features
- Warranty
- StandardWarranty: 1 year
