Brand:Huanyu
MOQ:2000
Quantity:100
Name: ALUMINUM POSITIVE OFFSET PS PLATE
Product specification:
Positive PS Plate (Pre-Sensitized Plate)
Thickness : 0.15mm-0.30mm, most commonly used: 0.15mm, 0.20mm,0.25mm, 0.27mm, 0.30mm
Charastics of our plate:
1.Multiple graining layer with fine structure, high resolutionand good tone .reproduction.
2. Good sensitivity,good developing latitude, good exposureability and fine water receptivity.
3.Oxidation layer ensuring good water retaining anddurability.
4. Gas leading layer reducing the time required for evacuationand preventing the formation of an indistinct image duringprinting.
Production feature:
Electrolytic process ensures that the graining cells of theplate are well distributed,the ballace of water- ink reachedrapidly and maintained in the printing .
Oxidation process makes the aluinum substrate hard anddurable, which is greatly improve water retaining and durability ofthe plate.
PS PLATE GUILDE
Adopting Japanese KOYO coating production line andimported fine aluminum coil, our PS plate is stable in quality andexcellent in performance.
Our plate has
1. High sensitivity,good developing latitude andgood water receptivity.
2.Multiple graining layer with fine structure, highresolution and good tone reproduction.
3.Oxidation layer ensuring good water retaining andlong press life.
4. Gas leading layer reducing the time required forevacuation and preventing the formation of an indistinct imageduring printing.
Recommended Guide
A. Exposure
1. In actual usage,user shall decide the appropriate exposure time according to thelight type, power, lights new or old degree and focus of thelight.
2. The soft platedensity shall not less than 3.8
3. If user uses 13grade continuous tone step scale/Gradient to decide the optimumtime of exposure, the color plate shall be exposed to 0.6 (grade4), proofing plate shall be exposed to 0.45 (grade 3)
4. After preliminarydecision on the exposure time, user operates exposure, development,observe if 2% tone and 10um component of forces are adopted well toeach other, then make rectification or settle sown.
5. For example: 3KVUV light, 1.0m light focus, brand new light, the right exposuretime shall be 60S /-10S
B. Development
1. Using our PS platedevelopment powder, put every bag of powder (500g) into 10L (10kgs)pure water, after complete resolve, it can be normally used.
2. Using our PS plateliquid, put each bottle of dense liquid into pure water of 5 moretimes. If using manual development, the proportion of dense liquidand pure water can be 1:6
3. When makingdevelopment liquid, user must mix it radically, if not use theliquid immediately, user shall store into sealed container to avoidinvalid.
4. Developmenttemperature is 23C /- 2C, too high temperature may harm theoxidized surface of the plate, thus caused dirty of the plate andreduce reproduction of the plate ability.
5. Development timeis 30 second, with the development times increased, developmentability reduces, then user shall prolong the development time andmake replacement when necessary.
ALUMINUM POSITIVE OFFSET PSPLATE




