Tripod turnstile
1. Features and Functions
1) The turnstile has fully rainproof stainless steel housing, processed by numeric control punching and laser drilling, novel and elegant.
2) The turnstile has unique mounting surfaces (for the installation of card reader and indicator light, etc. ), ensuring simple and convenient installation of the turnstile control equipment of system integrators.
3) The interior module of the tripod turnstile has a cushioning device for automatic regulation of hydraulic pressure, which helps to realize low noise, no impact and automatic decelerated returning to home position during operation of the turnstile. The interior module has been treated by zinc-plating.
4) Programmable turnstile control is available, for one-direction or bi-direction control (to be set by the user).
5) The base cover can be opened using a key, therefore it is convenient for the user to install it. There are card reader supports at both sides of the turnstile, and a 40CM*18CM mounting plate, for the mounting of controller, is fixed at one side of the housing.
6) The base is fixed with four 10MM expansion bolts.
2. Technical Parameters and Configuration:
Housing: Details as mentioned above
Tripod Bar: Length 480 mm, Diameter 40 mm
Power Supply: Single-Phase AC110V/220V, 3A, 50/60Hz
Control Voltage: DC24V, Power Consumption: 40W
Electromagnetism: No Residual Magnetism, without Magnetization
Buffer: Hydraulic Pressure Reset Cushioning, without Bumping Noise
Operating Temperature Range: -20° C~60° C
Operating Humidity Range: 0~95%RH
Net Weight: 50kg
Gross Weight: 60kg
Standard Configuration:
Stainless Steel Housing: 1 PC (With Supports for Mounting the Controller and Card Reader)
Bi-direction Electric Controlled Tripod Turnstile Interior Module: 1 PC
AC220V/DC24V Output Power Supply: 1 PC
Control Interface Board: 1 PC
Bi-direction Electronic Indicating Light: 1 PC
Instructions Manual: 1 PC
3. Control Interface
Two-Way (PASS1. PASS2) dry contact (or level) control signal input for controlling electromagnets and legal signal indicating lights at the in and out direction.Two-Way (FAL1, FAL2) dry contact (or level) status input for the control of illegal signal indicating light.Two-Way DC12V (DOOR1, DOOR2) legal connection, for connecting any kinds of controllers and various consumption devices.
