Low profile
Low DCR leaded
Large current
SMD magnetically shield
Shielded SMD power chip inductor

Magnetic shielded surface mount inductor with high current rating
Low profile and shielded very effective in space-conscious applications
Low resistance to deep power loss minimum

Appearance inspection: No external defect by visual inspection
Terminal strength: After soldering, between copper plate and terminals of coil, push in two directions of X, Y with standing as below conditions
Terminal should not peeled off
Heat endurance of reflow soldering: 240 degrees Celsius
Insulating resistance: Over 100MΩ At 100V DC between wire and core
Dielectric strength: No dielectric breakdown at 100V DC for one minute between wire and core

Temperature characteristic: Inductance coefficient (0 to 2, 000) x 10-6/(-25 to +80 degrees Celsius), inductance deviation within ± 5.0%, after 96 hours
Humidity characteristic: 90 to 95% relative humidity at 40± 2 and one hour drying under normal condition
Inductance deviation within ± 5.0% after vibration for one hour
Vibration resistance: In each of three orientations at sweep vibration (10-55-10Hz) with 1.5Vp-p amplitude
Similar to coil craft and Toko, Sumida, TDK and Murata brands
Operating temperature: -20 to 85 degrees Celsius (contains heating coil)