Water Jet Cutting steel (HY420) waterjet machine

WORKING TABLE
Effective Cutting Area of the Workbench:
X-axis: 2000MM
Y-axis: 3000MM
Z-axis: 150MM
Maximum Size of the Workbench
X-axis: 2050MM
Y-axis: 3050MM
Z-axis: 150MM
Height of the Workbench 1000MM

Cutting Accuracy plus or minus 0.1MM
Control Accuracy plus or minus 0.05MM
Repeat Positioning Accuracy plus or minus 0.025MM
Rapid Positioning Speed 5000mm/min
Cutting Platform
Guide way: Using the high-precision linear rolling guide way andball screws without gaps with Taiwan's nuts or domestic ground ballscrews without gaps to ensure high cutting precision.
X-axis and Y-axis: Using the servo motor imported from Japan todrive the cutting to ensure cutting accuracy.
Dust-proof design: Internal black organ-style dustproof coveragainst dust and water to ensure the cleanness of the screw guideway, so as to ensure cutting accuracy and easy cleanness andmaintenance of the equipment.
Centralized automatic lubrication system: When the guide way runs10000KM, the lubrication system will automatically conductlubrication, to ensure correct operation.
Automatic manual-operation system: To achieve long-range operation,ensuring the operator's safety and convenience.
- Pneumatic unloading valve: Instant on-off without resistance,accurate and effective unloading of the pressure of the system, toachieve operation without load and no-load start of the airknife.

HIGH PRESSURE PUMP

- Power of main machine (HP) 37KW
- Water consumption (L/MIN) 3.7
- Diameter of the nozzle (gem) (mm) 0.8/1.0
- Maximum pressure (MPA) 420
- Model HY420
- Way of Direction-changing Electronic Direction-changing
One Power Storage Device
Two Water Filters
Water Pump and Oil Pump, one for each
One High-pressure Water Switch
One Fuel Tank
Hydraulic Pressure Meter, Fuel Pressure Meter, High-pressure WaterControl Button, and High-pressure Oil Control Button, one foreach
- Air-cooled System, no other cooling systems
- One High-pressure Pipe (7~ 10 meters)