Lighting truss, Light truss, aluminum truss, square truss:
1. Name: Lighting truss
2. Model#: ITSC-ST-S389*389-1000-6082
3. Size: 389mm*389mm*1000mm (Other size customized)
4. Material: Aluminum 6082 T6/ Aluminum 6061 T6
5. Main Tube: 32mm*2mm
6. Parts: Top chord, Diagonal bracing, Node-or panel- Point
7. Aluminum Light Truss Connection: Connection with a slid bouble conical coupler connector, secured with a conical spigot pin in the ends of chord tubes. The conical spigot pins exposed to double shear force. A fully non-positive connection is created and the force is transimetted in the axes of the main chords, which is faster and more convnient (As shown in the photos at the bottom)
8 Aluminum Light Truss Clasification: According to the loading capacity, it includes the light duty truss series whose sizes are of 220mm*220mm,
220mm*220mm, 230mm *230mm, 290mm*290mm, 390mm*390mm; The medium duty truss series are of 400mm*400mm, 500mm*500mm, 520mm*520mm, 500mm*600mm; The heavy duty truss series are of 670mm*670mm, 520mm*760mm, and 1100mm*760mm.
9 Aluminum Light Truss Advantages: Compactness, strength, versatility, low unit weight and easy to assembly with the box corner system, quick to install.
10 Trusses options: There are many kinds of truss series in our company, according to the shape of the products, there are Ladder truss(Step truss), Triangle truss(Trio truss), Square truss(Quato truss) and Arc truss. Our aluminum truss thinkness including 4mm, 3mm, 2mm, 1.6mm. All above are our normal sizes, you special size are acceptable.
11 Do's & Don'ts
The Do's:
Regular cleanance, check and maintainance of your trusses to improve easy of assemblying
Damaged or deformed trusses, spigot pins or couplers not applied
A structural calculation for each construction is a must
Assemblying wit coper hammars to reduce damage to the truss and pins
With loads in node points
Mind the loads on the truss before lifting
The Don'ts
Mixing trusses of different suppliers unless stated by manufacturer
Maxium load exceeding the bearing capality as shown in the speci table
Drilling holes in trussing.
Attaching loads to the truss diagonals
Applying damaged trusses, couplers or spigot pins



