IpCHPC Pulse Current Charger
(SHAPE: I)
(SHAPE: II)
Feature Overview:
This is an intelligent battery charger, which adopts advanced high frequency switching mode power supply technology, and Pulse Current. The charging or recovery process is controlled intelligently by a high performance microprocessor.
Approved battery charge algorithms for ideal charging, which can not only make the charging with high efficiency, but also can resume the battery capacity and increase the battery life span. Fully sealed enclosure witch provides improved reliability in demanding environments, and the advantages of light weight, compact size and long life design make the charger more competitive than any other battery chargers
Some charger modules can be used in parallel directly to increase charging current and realize fast-speed charging.
Specifications:
AC Input Voltage: AC110V± 10%
Or AC220V± 15%
AC Input Frequency: 45Hz to 65Hz
Max AC Input current: I: 14A@110V, 7A@220V; II: 14A@220V
DC Output Voltage: See the Type Table
DC Output current: See the Type Table
Maximum Efficiency: More than 90%
Environmental Enclosure: IP32
Immunity-Europe: EN61200-4-2/3/5/6/11
Safety-North America: UL2202/UL1564 2ND Edition
Shock & Vibration: SAEJ1378
Operating Temperature: -20 Celsius degree to +50 Celsius degree(-22-122)
Operation Indication:
Stand By: POWER LED is on
Self-checking: Battery is connected, all green LEDs are flashing 15 times, and the fan is running rapidly.
Pulse current charging: RUN LED is on, and the other four little LEDs indicate the volume of the battery step by step.
100% Charge Indicator: All LEDs except the LED of RUN LED are on. The charger stops charging and the fan stops.
Protection Indications:
Over current: Electronic current limit, manual reset.
RUN LED is off; The two middle LEDs of Volume are on.
Thermal Protection: Shut down if thermal is over 85 ° C, auto-reset.
RUN LED is off; The two LEDs of Volume are flashing.
Over-time protection: Shut down.
RUN LED is off; The three LEDs of Volume are on.
Battery Fault: Shut down, auto-reset.
RUN LED is off; The four LEDs of Volume are flashing
Reverse Polarity: Electronic protection, auto-reset.
Installation Size
(SHAPE I)
(SHAPE II: Mm)
Optional function 1
The green wire outputs battery voltage when the charger is not plugged into AC to provide an interlock function - see Fig. 1. If used, a user-supplied 1A fast-blow external fuse must be installed inline to prevent damage. Shorting or drawing more than 1A may damage charger and void the warranty.
Optional function 2
The chargers can be programmable in order to let one charger be fit for different types of batteries.
