Power saver for air-condition
1. Main features and functions (The Power Saver is suitable for all home, commercial and specialized air-conditioner)
1)The power Saver is not linked to the air-conditioner by cord. It does not affect the wiring or the maintenance of air conditioner. It is safe and high-efficient and energy saving. No external control cord needed. Easy installation.
2)The input and output of power saver is controlled by the CPU processing the date of temperature and time with the guide of the temperature compensation technique: Thermal conversion technique and fuzzy control theory to optimize the operation and intelligent management. The number can be set and fixed permanently. The plan is scientific and power-saving and is not power-consuming.
3)The power saver can identify and operate normally without manual switch when the aire conditioner works in heating or cooling mode.
4)The power saver reduce 15%-30% of your electricity consumption without impact on the temperature or the comfort thanks to it's stable performance and minimal temperature fluctuations.
5)The power saver helps to stabilize voltages and reduce currents in your power supplies. It's power purification technology can filter and absorb the harmonic interference, peak voltage and the surge to provide a purified power supplier to air conditioning.
6)The power saver is suitable for all wall-mounted, floor standing, window air conditioners with single-phase or three-phase or inverter.
7)The power saver does not affect the control and protection of air-conditioning.
8)The power saver protect the compressor and extend its life by avoiding prolonged compressor running and frequent start.
9)The fault of power saver does not affect the normal operation of air-conditioning. It is easy to remove the power saver and no after-sale service is needed.
10)Small size. The oxidized aluminum-magnesium alloy casing makes the power save good-looking and durable and the brand components make them reliable.
11)Customized features are available, such as alarm output functions.
2. Installation
The following procedure is appropriate to wall mounted and window aire conditioner.
1)Clear the closure pad on the top of compensation box.
2)Open air-conditioning panel, remove filter.
3)Put the compensation box on the position of Neutral.
4)Put the WHOLE temperature sensor of air conditioner into compensation box through the lead-in whole and put it besides, not close to the temperature sensor of power saver.
5)Pull the data cable out from the wind grid of air conditioner to connect with the data cable of mainframe.
6)Restore air-conditioning filters and panels.
7)Connect the data cable docking socket (head) correctly and check the contacts.
8)Turn on switch of (Power on) the power saver and the indication will light up. The power saver will switch between the heating and cooling modes automatically.
9)It has set up a default temperature while users can set up a temperature according to the actual needs by push the button. This mashine can control temperature for hot and cold automatically. Normally, you need not regulate It. For some special demands, you can use a temperature switch to set up the perfect temperature, for hot, the temperature can be controlled between 13 degree to 21 degree, for cold, it's 22-29 degree.
The way to regulate:
K1, choose for hot or cold, and /confirm/i.
K2, choose and regulate the right temperature for hot and cold.
Note: Power saver can be put inside or outside the air-conditioner. When it is place inside the floor standing air conditioner, do avoided fan air inlet in case being sucked into and damaging the fan of air-conditioner, It can be powered from the air-conditioning control panel or outside suppler individually.
