Laser anion water treatment equipment

Industrial recycling cooling water treatment design China national standard GB50050-1995

1. System corrosion rate less than 0.125mm/a
2. Suspended or turbidity less than 10-20mg/L
3. metal ion quantity less than 0.5mg/L
The laser anion water treatment equipment can meet the requirement completely.

Application
1. Centre air condition water system
2. Industrial cooling water system
3. Industrial circulating water system
4. Heat exchange system

Function
1. Remove metal ion
2. Remove suspended
3. Inhibit corrosion
4. Remove black rust water

Working principle
Laser anion water treatment equipment is designed for centre air-condition water system, industrial cooling water system, industrial pipe recycling water system and heat exchange system.
Many kinds of industrial water system has the problem of corrosion, scale, sludge and microorganism.
< Industrial recycling cooling water treatment design>China national standard GB50050-1995
System corrosion rate < 0.125mm/a
Suspended or turbidity ≤ 10-20mg/L
metal ion quantity < 0.5mg/L
The Laser anion water treatment equipment will in good working condition if the water system can reach to above standard.

Working principle
This equipment is included of two parts. One is to generate laser signal and control signal. Another part is nature ore filter layer which is to filter metal ion and suspended. What's more, there is cathode protection electrode which is to protect equipment and water system. Operator can see the water quality change in eyes. Suspended and metal ion standard will reduce based on chemical test.
It can do good effect in immediately on serious descaling water system.
Using and Maintenance
The electricity parameter of equipment is checked and tested. The equipment can work if the electricity is energized. It needs drain and backwash in one time every seven days.
Effect Check
Remove metal ion: The operator can check the metal ion (divalent metal ion and ferric). The test value will reduce 20-90% compared with original.
Remove suspended: The operator can check the suspended. The test value will reduce 30-98% compared with original.
Inhibit corrosion: The operator can compare the carbon steel piece which is soaked in treated water with carbon steel piece in original water. You will not see the corrosion spot.
Remove black rust water: The operator will find water turbidity reduce and reach to zero.