Functions:
XDSL Physical Layer Testing
ADSL2+Modular: Full support all ADSL standards, which includes ANSI T1.413 Issue 2, ITU-T G. 992.1(G. Dmt), ITU-T G. 992.2 (G. Lite), ITU-T G. 992.3(ADSL2), RE-ADSL2 and ITU-T G. 992.5(ADSL2+).

VDSL2 Modular: Apart from all standards above mentioned, it also particularly support ITU-T G. 993.2(VDSL2).

Test upstream, downstream, maximum speed and channel utilization. Test upstream and downstream noise margin, and export power attenuation.

Test error value of proximal end and remote end FEC/CRC/HEC/NCD/OCD.

Auto test and display proximal end and remote signal loss, frame loss, power loss, cell loss, border loss and many other Defect information, along with history record contrast to the current display.

Statistic error seconds.

Display every sub-channel of Bits per Tone by the mean of graphic and number.
Display every sub-channel of SNR per Tone by the mean of graphic and number.
XDSL Network Layer Test

ATM F4, F5 OAM loopback test.

Support RFC1483(RFC2684), PPPoE(RFC2516), DHCP, PAP/CHAP and variety of upper layer protocols.

PPPoE dial-up obtain IP address and Ping test.

Fixed Ping Test
Ping test that includes Ping loss test (Be able to identify times and package size), Ping loopback latency test (To test its MAX, MIN, Average level ).
Router tracking test
Replace ADSL2+/VDSL2 Modem
XDSL Application Layer Test
Net Scan est upstream and downstream noise margin, and export power and Net Rate Measurement

FTP Speed Measurement
Ethernet Test DHCP client test
PPPoE dial-up is used to test the problem from user's IP broadband or LAN.
Network layer test: Ping, Ipconfig, Route and router tracking, etc.
Application layer test: Net Scan and rate measurement, and FTP speed measurement.

Cable Test
Data management test
Audio line tracking

Others
Auto Power-off
Beep and LED alarm.
Digital Multi Meter (DMM) is used to test loop resistance, insulation resistance, capacitance, AC-DC voltage and estimate wire length.