Model: F5-11R0A/P-T4
11R0: Motor capacity
A: Constant torque load
P: Fan or pump
T: Three-phase

1. Applications
Textile machinery, printing machinery, food machinery, packaging machinery, air conditioning machinery, fan, pump and other general machinery

2. Parameters
Input:
A. Rated voltage: Three-phase 380V~440V (allowed voltage range: 320V~440V)
B. Frequency: 50/60Hz, (allowed frequency range: 48~63Hz)
C. Rated current: 26.0 A

Output:
A. Rated voltage: Three phases, 0~380V/440V
B. Frequency: 0~650Hz
C. Rated current: 25.0 A
D. Overload capacity:
Type A: 150% of the rated current for 1 minute every 10 minutes; 200% of the rated current for 0.5 second every minute.
Type P: 120% of the rated current for 1 minute every 10 minutes; 150% of the rated current for 1 second every minute
E. Output power: 11.0 kW

Adaptive motor capacity: 11.0 kW
Modulation mode: Flux Vector PWM modulation
Speed adjusting range: 1: 100
Start torque: 180%, 0.5Hz
Setting of resolution:
A. Digital setting: 0.01Hz;
B. Analog setting: 0.2% of the highest frequency setting.
Torque lifting: Automatic or manual 0.1%~30%
Control mode: Linear V/F control, square V/F control, multipoint V/F control, vector control
Multi-steps speed control: Multiple steps by built-in PLC.
Built-in PI control
Automatic voltage regulation (AVR): Maintain output voltage stable when input voltage fluctuates.
Automatic current limiting: Automatically restrict current during running to prevent the over-current.

Communication interface: RS485/ RS232
Control command input: Control panel, control terminal, series bus controller.
Frequency setting: Digital setting, analog voltage setting, analog current setting, pulse setting, series bus controller setting.
Auxiliary frequency setting: Flexible auxiliary frequency fine-turning, frequency synthesis.
Pulse output terminal: Output square wave pulse signal 0~50Hz. Output setting frequency, output frequency and other physical quantities.
Analog output terminal: 2 analog signal outputs, 0~10V or 0/4~20mA optional, output setting frequency, output frequency and other physical quantities.
Protective Function: Over-current protection, over-voltage protection, under-voltage protection, over-heat protection, phases loss protection.
LCD display: Chinese or English

3. Features
A. High torque, high accuracy, high performance.
B. High reliability, withstanding bad power supply condition and bad weather, anti-corrosive, anti-rust.
C. PI controller, simple PLC, flexible I/O terminals, prompt data store.
D. Low noise, low electromagnetic interference.
E. Excellent trip protection, uninterrupted operation while momentary voltage sag.
F. Multiple user interface and strong programmability, self-define V/F

4. Environmental limits
Ambient temperature:
Storage: -40...+70° C
Operation: -10...+40° C, no frost allowed
Relative humidity: < 95%, no condensation allowed.
Altitude: 0...1000 m without derating; 1000...4000 m with derating