Model:PSGB
Introduction
Cone crusher can be used as both secondary crusher and fine crusher, and it is suitable to crush all kinds of stones. It is divided into three kinds: standard type, shorthead type and medium type. These three kinds have nearly same structure, but they have different feeding and discharging size with different crushing cavity.
Cone crusher is widely used in mining, building, metallurgy, etc. It has advantages of high capacity, formal discharging size, long service life, high working efficiency, easy maintenance and so on.
According to the difference of the discharging hole and over load insurance type, the cone crusher can be divided into spring cone crusher and hydraulic cone crusher.
| Spring cone crusher: Xingbang Heavy Machinery Co., Ltd. Spring cone crusher working structure: it is made up of the crushing cone with Mn steel liner and fixed cone. Adjusting device:adjusting ring, supporting ring, lock nut, driving hydraulic cylinder, lock hydraulic cylinder and piston. Anti-dust device:sink, rhone, check ring, annular ring, baffle ring. | Hydraulic cone crusher: It is easy to adjust the discharging hole, overload protection of the security is higher, low failure rate, high automation degree and high working efficiency. Hydraulic cone crusher is the development direction of spring cone crusher. It is divided into three types: single cylinder, bottom single cylinder and multi-cylinder. |
Technical data
Hydraulic cone crusher:
| Specification | Model | Type of Cavity mm | Dia.of cone mm | Discharge Setting mm | Max Feed Opening With Min. CSS mm | Max Feeding Size mm | Capacity t/h | Motor Power kw | Weight kg | Dimension (Length×Width ×> Hight) mm |
| φ900 | PSGB-0910 | Fine | 900 | 9-22 | 102 | 85 | 45-91 | 75 | 9980 | 2656×1636×2241 |
| PSGB-0917 | Coarse | 13-38 | 175 | 150 | 59-163 | |||||
| PSGB-0918 | Extra Coarse | 25-38 | 178 | 150 | 118-163 | |||||
| PSGD-0904 | Fine | 3-13 | 41 | 35 | 27-90 | 10530 | ||||
| PSGD-0906 | Medium | 3-16 | 76 | 65 | 27-100 | |||||
| PSGD-0907 | Coarse | 6-19 | 102 | 85 | 59-129 | |||||
| φ1300 | PSGB-1313 | Fine | 1295 | 13-31 | 137 | 115 | 109-181 | 160 | 22460 | 2983×1866×3156 |
| PSGB-1321 | Medium | 16-38 | 210 | 178 | 132-253 | |||||
| PSGB-1324 | Coarse | 19-51 | 241 | 205 | 172-349 | |||||
| PSGB-1325 | Extra Coarse | 25-51 | 259 | 220 | 236-358 | |||||
| PSGD-1306 | Fine | 3-16 | 64 | 54 | 36-163 | 22590 | ||||
| PSGD-1308 | Medium | 6-16 | 89 | 76 | 82-164 | |||||
| PSGD-1310 | Coarse | 8-15 | 105 | 89 | 109-227 | |||||
| PSGD-1313 | Extra Coarse | 16-25 | 133 | 113 | 209-236 | |||||
| φ1600 | PSGB-1620 | Fine | 1676 | 16-38 | 209 | 178 | 181-327 | 220 | 43270 | 3941×2952×3371 |
| PSGB-1624 | Medium | 22-51 | 251 | 205 | 258-417 | |||||
| PSGB-1626 | Coarse | 25-64 | 269 | 228 | 299-635 | |||||
| PSGB-1636 | Extra Coarse | 38-64 | 368 | 313 | 431-630 | |||||
| PSGD-1607 | Fine | 5-13 | 70 | 60 | 90-209 | 43870 | ||||
| PSGD-1608 | Medium | 6-19 | 89 | 76 | 136-281 | |||||
| PSGD-1613 | Coarse | 10-25 | 133 | 113 | 190-336 | |||||
| PSGD-1614 | Extra Coarse | 13-25 | 133 | 113 | 253-336 | |||||
| φ2100 | PSGB-2127 | Fine | 2134 | 19-38 | 278 | 236 | 544-1034 | 400 | 86730 | 4613×3302×4638 |
| PSGB-2133 | Medium | 25-51 | 334 | 284 | 862-1424 | |||||
| PSGB-2136 | Coarse | 31-64 | 369 | 314 | 1125-1814 | |||||
| PSGB-2146 | Extra Coarse | 38-64 | 460 | 391 | 1252-1941 | |||||
| PSGD-2110 | Fine | 5-16 | 105 | 89 | 218-463 | 89500 | ||||
| PSGD-2113 | Medium | 10-19 | 133 | 113 | 404-580 | |||||
| PSGD-2117 | Coarse | 13-25 | 178 | 151 | 517-680 | |||||
| PSGD-2120 | Extra Coarse | 16-25 | 203 | 172 | 580-744 |
,Spring Cone Crusher
| model | Diameter of crushing cone (mm) | Max.feeding size (mm) | Width of discharge opening (mm) | Processing capacity (t/h) | Motor power (kw) | Swing frequency of main shaft | Total weight (t) | Dimensions (L×W×H) (mm) | |
| PYB | 600*600 | 65 | 12-25 | 2-8 | 30 | 356 | 5 | 2234×1370×1675 | |
| PYD | 600*600 | 35 | 3-13 | 12-23 | 30 | 356 | 5.5 | 2234×1370×1675 | |
| PYB | 900*900 | 115 | 15-50 | 50-90 | 55 | 333 | 11.2 | 2692×1640×2350 | |
| PYZ | 900*900 | 60 | 5-20 | 20-65 | 55 | 333 | 11.2 | 2692×1640×2350 | |
| PYD | 900*900 | 50 | 3-13 | 15-50 | 55 | 333 | 11.3 | 2692×1640×2350 | |
| PYB | 1200*1200 | 145 | 20-50 | 110-168 | 110 | 300 | 24.7 | 2790×1878×2844 | |
| PYZ | 1200*1200 | 100 | 8-25 | 42-135 | 110 | 300 | 25 | 2790×1878×2844 | |
| PYD | 1200*1200 | 50 | 3-15 | 18-105 | 110 | 300 | 25.3 | 2790×1878×2844 | |
| PYB | 1750*1750 | 215 | 25-50 | 280-480 | 160 | 245 | 50.3 | 3910×2894×3809 | |
| PYZ | 750*1750 | 185 | 10-30 | 115-320 | 160 | 245 | 50.3 | 3910×2894×3809 | |
| PYD | 750*1750 | 85 | 5-13 | 75-230 | 160 | 245 | 50.2 | 3910×2894×3809 | |
| PYB | 2200*2200 | 300 | 30-60 | 59-1000 | 280-260 | 220 | 80 | 4622×3302×4470 | |
| PYZ | 2200*2200 | 230 | 10-30 | 200-580 | 280-260 | 220 | 80 | 4622×3302×4470 | |
| PYD | 2200*2200 | 100 | 5-15 | 120-340 | 280-260 | 220 | 81.4 | 4622×3302×4470 | |



