Model:N2
PSA Series Oxygen/Nitrogen Plants Share:
PSA Oxygen/Nitrogen generator utilizes zeolite molecular sieve as Adsorbent and produces Oxygen/Nitrogen by making use of the PSA principle. Under certain pressure, zeolite molecular sieve has different Oxygen/Nitrogen adsorption capacity, i.e. much more nitrogen adsorption capacity than oxygen adsorption capacity. PLC controls the pneumatic valve to realize two towers for alternate adsorption and desorption as per pressure change for carrying out oxygen/nitrogen separation and produces nitrogen with desired purity.
In the PSA Oxygen/Nitrogen plants the production of Nitrogen gas from the Atmospheric Air is based on Pressure Swing Adsorption (PSA) principle by adsorption of oxygen gas using a special grade of imported Carbon Molecular Sieves (CMS).
PSA Plant
Air Compressor, compresses the atmospheric air to a pressure of 7.0 kg/cm2g and cools to ambient temperature in a shell and tube type heat exchanger. Automatic drain valve (ADV) of Air receiver automatically releases the condensed moisture. The compressed air at ambient temperature passes through special grade of Carbon Molecular Sieves and PSA module packed with activated alumina. The production of Oxygen/Nitrogen is majorly depends upon the Kinetic Separation technique. Oxygen due to smaller in size (kinetic diameter 3.46 A0) diffuses much faster than Nitrogen (kinetic diameter 3.64 A0) and therefore gets adsorbed in carbon molecular sieves while Nitrogen is collected as the high-pressure product.
The entire operation is fully automatic and controlled by a combination of sequence programmer and quick change over valves. Nitrogen gas of desired purity at 5.0 kg/cm2g pressure and having a Dew Point of (-) 40 degree Celsius is produced by the PSA Unit, now flows to a surge vessel to balance the fluctuations in pressure and concentration.
Now the gas can be stored in a storage tank at 5 Kg/cm2g pressure from where it can be made available for process application. The storage tank can selected of any desired capacity as per peak hours demand for Nitrogen gas or power interruptions.
This system is fully automatic and need not any special operator for operation. once it is started it generates Nitrogen at constant flow rate and at constant pressure.
Further the produced nitrogen gas can be boosted to high pressures by providing any reliable booster compressors up to 40 kg/cm2g pressure.




