Metallurgy, Mineral & Energy
Steel Segment Mould
2016-11-03 11:11  Views:79
Price:Negotiable
Model:-
Send Inquiry

1.Applications Of Steel Segment Moulds

Tunnel concrete segment of the geometric size and shape from the geometry and characteristics of the tunnel determined. Each tunnel is different, each tunnel segment is different, its different segments die naturally.

Mold geometry depends entirely on the concrete segment of geometry. Die only in the concrete segment based on the design drawings.

Therefore, before the mold is very important to get the right drawing, often due to drawing problems for the mold design time

Our goal is to produce high-precision processing of a segment of the mold, and durable. Indeed, the mold will be a big stress, two important long-term vibration, hundreds of thousands of re-use.

2.Structure Of Steel Steel Segment Mould:

A segment of steel molds, from a bottom, four side, two roof-shaped form a mold cavity. The length of a segment according to the diameter of the tunnel to reach a few meters, and precision to a tenth of millimeters, the steel structures such precision is rare, it is the technical strengths.

As the stripping of concrete required, four side panels and roof are in various parts of the activities, this case has been very difficult to maintain accuracy. Even worse, die life reused thousands of times required to maintain the same accuracy.

Complex by the vibrator is usually installed above the floor in the mold, the structure has required special handling.
This is in accordance with die size required to carry out repeated calculation of the force structure of the situation, find the weak point of structure to be strengthened.

3.Enerpat Steel Steel Segment Mould Unique Features:

Enerpat design team has accumulated decades of experience, so that they can tunnel under the different characteristics of each design the perfect targeted mold. Design Department and the tunnel segment of the design units to communicate, the first segment of the design of concrete and sealed system to improve

Vibration system, ejection system, designed seal in place, the concrete segment of the extraction of the transport system, the materials used, material, all of these systems are different under the new tunnel study design.

Enerpat  customers and lack of communication between the design department, or if no communication, mold design defect is likely to occur are not perfect, thus increasing the subsequent production costs, security risks, reduce production efficiency.

Contact Infomation
Send Inquiry
Company name:Enerpat Group Co.,Ltd
Status:[Offline] [Send message] [Chat]
Business contact:Jack.Chian(Mr.)
Telphone:
Mobile:
Fax:
Area: Caribbean Region-Bermuda
Address:Motou Industry Zone