Small Bow Thruster:
BowThrusters can be powered by diesel engines, electric motors or hydraulic motors.
Electric motors are included optionally in the scope of supply. The prime mover can be connected either horizontally or vertically and thus incorporated optimally into the naval architectural design.
When fixed-pitch propellers are used, electric and hydraulic motors allow the direction of thrust to be reversed.
An additional reversing gearbox is required if the thruster is powered by a diesel engine.
Thrust is the decisive criterion of a bow thruster. Therefore attaches great importance to an optimum propeller design that is individually adapted to the vessel geometry in each case. At the same time, the propeller design takes into account any special requirements in terms of noise level that are relevant for the application. A major parameter for the effectiveness of a bowthruster is the size of the gap between the tunnel and the propeller, which has reduced to a minimum on all models.
Small tugboat,ferry,tanker will apply small power bow thruster to improve the operation.It is widely used.
| Bow thruster parameters | ||||||||
| Model | FP-500 | FP-600 | FP-700 | FP-800 | FP-900 | FP-1000 | FP-1100 | FP-1300 |
| Max input power | 63/72 | 90/105 | 135/165 | 180/190 | 200/235 | 280/290 | 315/340 | 445/480 |
| Ratio | 1.52 | 2.071 | 2.07 | 2.417 | 2.42 | 3.09 | 3.09 | 3.78 |
| Max input torque | 600 | 900 | 900 | 1400 | 1400 | 2100 | 2100 | 3000 |
| Max input speed | 1450/1750 | 1450/1750 | 1450/1750 | 1450/1750 | 1450/1750 | 1450/1750 | 1450/1750 | 1450/1750 |
| Propeller speed | 954/1151 | 700/845 | 700/845 | 600/724 | 600/724 | 469.1/566 | 469.1/566 | 384/463 |
| Propeller diameter | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1300 |
| Max thrust | 10/11.2 | 14.5/16.3 | 20/24.8 | 29.5/30.5 | 31/35.4 | 43/45.2 | 49/53.8 | 67/73 |
| Cylinder length | 600 | 800 | 800 | 920 | 920 | 1045 | 1045 | 1190 |
| Cylinder internal | 515 | 615 | 715 | 818 | 918 | 1020 | 1120 | 1328 |




