Brand:Finsulatech
MOQ:1
Quantity:20
calcium silicate cover
slightly changed thermal conductivity
resisting to 1100 centigrade
high mechanical strength
Brief Introduction of Calcium Silicate
Beijing Finsulatech calcium silicate is commonly used as hightemperature insulation materials. It is white, asbestos free,rigid. Industrial grade piping and equipment insulation is oftenfabricated from calcium silicate. Calcium silicate competes inthese realms against rock wool,perlite mixture and vermiculitebonded with sodium silicate.It is manufactured and sold in threedifferent forms: preformed block, preformed pipe, and board.ProductCharacteristics Absolutely excellent!superior insulation property(relatively flat thermal conductivity curve)refractory , having ahigh melting point, resistant to melting. Refractory materials areoften used to line the interior of industrial furnaces. extremelyhigh compressive strength, and high flexural strength, couldwithstand considerable physical abuse without loss of insulatingefficiency.a Class A rating for Flame Spread/Smoke Developed, andis noncombustible (ASTM E136),“green”-asbestos freehigh-temperaturestructural integritycorrosion inhibition.a major contributor toconservation of energygood maintainance of those properties overtime up to its classified temperature (superior durability)noreports of calcium silicate's being hazardous or harmful tohumans
(ASTM) C533 Yes, we can!
American Society for Testing and Materials (ASTM) C533
Type I: maximum-use temperature of 1,200°F(649°C),maximumdensity:15 pounds per cubic foot (lbs/ft3) (240kg/m³)or 22 lbs/ft3(352kg/m³)
Type II: 700°F (927°C)and maximum density of 22 lbs/ft3(352kg/m³)
Both types: Compressive strength is greater than 100 pounds persquare inch (psi) (688 kPa), at a 5-percent deformation.Flexuralstrength is greater than 50 psi (344 kPa). The maximum linearshrinkage: only 2 percent.
Both the flame spread and smoke developed index are 0 per ASTME84.Maximum allowable mass loss values: 20%and 40% after tumblingfor 10 minutes and 20 minutes, respectively, demonstrating itsresistance to breakage.Common Applications Right here, hesitate nomore!
We insulate process and laboratory kilns and furnaces, thermalanalytical instruments, and specialty applications,high-temperature pipe and equipment in industrial facilities, suchas oil refineries, petrochemical plants, power plants, steamdistribution lines, chemical plants, refineries.
TDS for your reference
Brand | JGG2-17 | JGG2-20 | JGG2-24 |
Maximum service temperature | 1000 | 1000 | 1000 |
Bulk density (kg/m3) | 170 | 200 | 240 |
Compressive strength (MPa) | ≥0.8 | ≥1.2 | ≥2.0 |
Modulus of rupture (MPa) | ≥0.3 | ≥0.5 | ≥0.7 |
Thermal conductivity (W/mK) |
