Metallurgy, Mineral & Energy
Steamed bread machine (stainless steel)
2016-11-03 03:25  Views:147
Price:Negotiable
Model:MG65-12
Send Inquiry

MG65-12-type bread machine Introduction and main technical parameters
    MG65-12-type fourth-generation (steel-new) bread machine is my company technical staff in line with the principle of endless innovation and user needs, in our plant based on the old products collected at home and abroad, director of product after 10 years of efforts, repeated practice and repeatedly improved, well-designed a new type of steel luxury, high forming rate, the characteristics of taste and good bread machines, widely used in schools, military units, bread room, factory, mine and so different users.
    1, the fourth generation of steamed bread machine head, body, auger, bucket surface, dry surface boxes, shell-quality non-toxic stainless steel materials are used to solve the problem of corrosion and improve the health conditions.
    2, this machine is the dried noodles box below to install an adjustable flow of dry flour, the activities of boards that avoids flour, humidity and weather caused the bread with blank rough, sticky roller forming, roll forming by hand to the side scatter troubles, thus reducing the labor intensity and improve the quality of steamed bread.
    3, for surface area using three stainless steel auger and sent to face, resolve to send the uneven surface, less than, left face, dough heat and so on.
    4, develop testing equipment to improve the processing of twisted dragon and aluminum forming rollers, axes of precision machining, re-pairs and changes compared with the relative angle, and applied for two national patents, machine head, adding the public face of the pressure device, opposite the regiment conducted a secondary fine playing surface, the output layer of bread also emerged from the color white, good taste, appearance smooth, and so on.
Patent No. 2 in this machine are: 02,341,195.3 02,269,753.5
    5, the main technical parameters:
Equipped with power: Y100L2-4, 380V, 3KW, 50HZ motor
Production efficiency: 65 / min; per hour production of 300-500 kg 200-350 kg bread flour processing
Steamed Weight: 140 grams, 120 grams, 95 grams, 82 grams / each bread around
Steamed standard quantitative: 3.8, 4, 5, 6 / per 500 grams of bread is about
Machine Head Model Number: 5, 6, 7, (8-9) head / per 500 grams of flour is about
Machine Weight: 256 kilograms
Size: 1480 * 490 * 910cm


First, the use of pre-prepared
    1, the machine's handling as much as possible the use of lifting equipment, weight drop and the impact should be avoided in order to avoid distortion, affecting the rate of steamed bread molding.
    2, packing machine out of the box installation site, unpacking the machine after the first check whether there is damage, and in accordance with packing list inventory attachments, and accessories for the lack of any injury, should be genuinely looking for sales Xiangyang doors to trace, in the case of plant responsibility , the main communicated to outside the reasons our plant quality control section.
    3, installation of machines required site dry, place the level of a solid, leaving an appropriate space for ease of operation, external power supply should be invited to electrical professionals in the installation, and reliable grounding the machine to turn the machine to respond to the arrow with the same signs, such as in the opposite direction, immediately correction, this machine is strictly prohibited reversed.
    4, using this machine must be carefully pre-inspection "manual", "the first time debug operation Xiang Jie", familiar with the machine structure and performance, first check the power used, the voltage is compatible with the machine nominal electrical equipment is normal, grounding is reliable.
    5, prior to use to open the flap to check the removal of foreign body, each part of turning an empty machine running well before use.


2, the operation use
    1, will be about 500 grams of dried flour (fill side) into dried noodles box, and then opens the glass doors to the lower box of flour dry surface wipe board regulator to open 2-3 cm (according to the weather, adjust the size of flour, humidity, in order to avoid too much or too little flour or the bread is not only forming roller, dry surface with the box of flour should be used as added).
    2, steamed bread machine dough surface water ratio of 1:0.4, add yeast and white base and the surface plane with uniform mixing, after fermentation in the dough prior to seize the time to create, and then steamed bread dough embryo (yeast can be used fresh / dry yeast, can also be traditional and old yeast dough)
    3, will and good dough cut into about 1-1.5 kg's long, continuous investment in uniform face the Big Dipper, the dough should not put too little or too full, so as to avoid inconsistencies in the size of steamed bread.
    4, start sending side, the first observation of steamed bread molding, should the molding or two with a bad "little tail" should first check the weight of bread, if not met, could open the door, adjust hand wheel (see Figure 2), a group of from big to small, gradual adjustments until satisfied. (Embryo testing the weight of bread, according to the first few models of different machines, for example, six bread machines, bread should be said that six embryos of 1.4 Jin date).
    5, in the use of the process, try not to shut down, so as to avoid too long, the dough fermentation, bond forming rollers and keep watch "fill surface" below the amount to prevent bonding. In operation, the steamed bread embryo a "pulling" on the side of the lower part of Long Ti.
    6, production is completed, will Longti or steam tray of bread embryos to wake up hair, a group of 15-30 minutes Fermentation temperatures can also choose prover awake hair, to be fully fermented, during steaming.
    7, using the end of the aluminum shaft, cutter Department to clean up after, the best rubbed with cooking oil, and to face the Big Dipper I face within the clean up, but also to do with the fermentation of raw materials, cover the mouth covered to prevent foreign matter from entering the building to cut off the power.


3, maintenance and repair
    1, the machine after each use, should I try to clean surfaces, such as the use quit at the next junction, non-degenerate, they do not clean up, should the more than two days not to use, brought down after the special wrench to take the machine with a hammer to the Under the impulse to fight big nut hole (see Figure) to loose, and then remove the nut to clean up more than surface to prevent re-use surface League Cadres junction block, causing damage to the machine.
    2, after the end of each use should be clean cutter, molding the remainder of the shaft surface, cleaning utensils shall not use sharp metal scraper shovel or use of sprinkler irrigation pipes to prevent leakage and occurrence of bad bread molding.
    3, forming rollers on both sides of gear should be the class addend drip oil, gear box factory to add a little gear oil to use after six months should be checked to add, not an excessive, so as not to flow from the hole. Grease within the bearing should be based on the use of replacement.


IV Notes
    1, the machine running when not allow hand contact with a rotating metal appliance parts, causing the machine to prevent injury, must be cut off the power before cleaning.
    2, stopped by the opening of the machine installed in the machine to start a combination of switch control.
    3, in particular, to remind users to purchase the machine when the light on the model of the scale to provide the bread selection and specification of the data correctly.
    4, this machine under the 5, 6, 7, 8, 10, determined according 500g dry flour.
    5, the products and a "three guarantees" quality problem occurs within six months of free onsite service (agreement within one year to the annual service).
    6, because of illegal operation or more than "three packs of" period-site maintenance requirements must first be make payable to the company.
The manual interpretation of naturalization Xusheng Food Machinery Co., Ltd., subject to change without notice

Contact Infomation
Send Inquiry
Company name:Shandong Boxing Xusheng Food Machinery Co., Ltd.
Status:[Offline] [Send message] [Chat]
Business contact:Wang(Mr.)
Telphone:
Mobile:
Fax:
Area: Caribbean Region-Bermuda
Address:Binzhou City, Shandong Province Boxing County Hing Fook Industrial Park North in the first